• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C6 Trans Linkage
#1
Hi Guys,
I am reinstalling my C6 trans ( 351C, 71 ) after about a year. I know I need to use #15 drill to orientate the column, but what position does gear selector and shifting lever on trans need to be in before I tie it all together??

Thank you in advance!!!
  Reply
#2
manyo;200068 Wrote:Hi Guys,
I am reinstalling my C6 trans ( 351C, 71 ) after about a year. I know I need to use #15 drill to orientate the column, but what position does gear selector and shifting lever on trans need to be in before I tie it all together??

Thank you in advance!!!

Shifter in Neutral position, two attaching bolts loose, insert #43 (.089") drill to depth of 31/64" (.484") (3 holes in the switch must line up). Tighten bolts, remove bit. Check for proper starting and back up light functioning. If it doesn't work search here using "neutral safety" and "c9zx". About 4 threads will result talking about secondary adjustment and dis-assembly and cleaning. If your car still has the lock rod, adjust it after the shifter linkage is installed and adjusted. Shifter linkage is adjusted with the shifter and the transmission in the Drive position. Happy Motoring! Chuck
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  C-6 trans 164runner 2 249 09-08-2019, 07:43 PM
Last Post: 164runner
  4 speed top loader jambing. Linkage or gearbox issue Stanglover 12 440 08-30-2019, 07:37 PM
Last Post: Stanglover
  3 speed manual trans problem 48Ford 1 205 08-22-2019, 10:43 AM
Last Post: Carolina_Mountain_Mustangs
  Clutch linkage question 72' Mach 1 12 445 07-09-2019, 09:22 AM
Last Post: 72' Mach 1
  Clutch Linkage type Bruce180vf 9 548 05-31-2019, 05:25 AM
Last Post: cheezsnake
  Throttle Linkage Modification Issue bigfoot72 7 647 04-22-2019, 03:24 PM
Last Post: bigfoot72
  351C 4V / C6 auto trans removal advice needed baz70 33 1,397 02-25-2019, 09:27 AM
Last Post: Bill73Ragtop
  C6 Trans naa10104 5 389 02-12-2019, 10:38 PM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)