• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Buck Tag
#11
My 71 convertible from Dearborn is on the passenger side. There was a long discussion on this awhile back.

https://www.7173mustangs.com/thread-buck...t=Buck+tag
  Reply
#12
I have a 72 built in Dearborn and my buck tag was on the drivers side.

run_horse Run Horse Run!
John 72 Q Code
  Reply
#13
My original 73 mach 1 and 73 vert are both on the drivers side. Only have a pic of the Mach on the car.
[Image: DSC00146.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#14
My '71 is on the passenger side.

mike

[Image: 1_11_11_13_11_50_27.png]
  Reply
#15
(12-31-2018, 02:54 PM)71 gbvert Wrote: My 71 convertible from Dearborn is on the passenger side.  There was a long discussion on this awhile back.

https://www.7173mustangs.com/thread-buck...t=Buck+tag

Thank you for connecting back to the prior thread.  I am gathering that 71 is leaning towards passenger (Right) and 72-73 leaning towards driver (Left) side in the poll in that thread.  I am going to reach out through the Concourse forum and see if there is a similar concurrence amongst the judging community.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#16
My 71 has it on the passenger core support. But it also has one on the passenger side shock tower support brace. Is this kinda odd ?

[Image: 20r9ylt.jpg]
  Reply
#17
The Concourse forum feedback coincides with what we have gathered here. Thank you everyone for the feedback.

Nance, first reporting of one being on the shock tower brace that I have heard. Very interesting. Is it the same as the core support mounted tag?

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#18
(01-08-2019, 11:14 AM)bkdunha Wrote: The Concourse forum feedback coincides with what we have gathered here.  Thank you everyone for the feedback.

Nance, first reporting of one being on the shock tower brace that I have heard.  Very interesting.  Is it the same as the core support mounted tag?

To be honest..., I put little faith in that forum when it comes to the '71-3 car's... left it a long time ago.
  Reply
#19
(01-08-2019, 12:06 PM)7173Vert Wrote:
(01-08-2019, 11:14 AM)bkdunha Wrote: The Concourse forum feedback coincides with what we have gathered here.  Thank you everyone for the feedback.

Nance, first reporting of one being on the shock tower brace that I have heard.  Very interesting.  Is it the same as the core support mounted tag?

To be honest..., I put little faith in that forum when it comes to the '71-3 car's... left it a long time ago.

I understand.  I wanted to reach out to this community first for the feedback from what I view as the most knowledgeable 71-73 community available.  I took everyone's feedback here to compare to what is provided by the Concourse group.  Hopefully we can provide some fact based knowledge to the Concourse group and improve their understanding.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#20
(01-08-2019, 11:14 AM)bkdunha Wrote: The Concourse forum feedback coincides with what we have gathered here.  Thank you everyone for the feedback.

Nance, first reporting of one being on the shock tower brace that I have heard.  Very interesting.  Is it the same as the core support mounted tag?

 They match.Here is a photo  
[Image: 016.jpg]

[Image: 20r9ylt.jpg]
  Reply
Share Thread:  




Users browsing this thread: 1 Guest(s)