• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Brake lines routing
#1
Hey,

Does anyone have a diagram showing how the front break and rear line mounts to the firewall? I'm not sure where the clips mount. Some are obvious but I'm not sure if there is one under the power booster.

Chasing Rust
  Reply
#2
Here you go...I have other pics of firewall if you get stuck.

Jeff

[Image: 2ccm2iu.jpg]

Darren 72;159871 Wrote:Hey,

Does anyone have a diagram showing how the front break and rear line mounts to the firewall? I'm not sure where the clips mount. Some are obvious but I'm not sure if there is one under the power booster.
  Reply
#3
jeff8877;159900 Wrote:Here you go...I have other pics of firewall if you get stuck.

Jeff

[Image: 2ccm2iu.jpg]

Darren 72;159871 Wrote:Hey,

Does anyone have a diagram showing how the front break and rear line mounts to the firewall? I'm not sure where the clips mount. Some are obvious but I'm not sure if there is one under the power booster.
Thanks Jeff....that helps. Are there any mounts on the driver side apron or does it just go into the distribution block?

Also where the line comes out from the passenger side brakes, my line is not up against the apron with a clip. Its off of the apron probably 4". Is that correct? The vent canister is right in this location. If you have more pics to share that would be great.

Thanks for your help,

D.Rolls

Chasing Rust
  Reply
#4
Couple more that may answer your questions...I just got done replacing all mine and was really glad I took all the pics.

Jeff

[Image: 118k1g9.jpg]

[Image: 2z9cndf.jpg]

[Image: 282e4g.jpg]
  Reply
#5
Here are a couple more.

Front

   
   
   

Rear
   

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#6
bkdunha;159986 Wrote:Here are a couple more.

Front





Rear

Wow! That's a huge help. Thanks for sharing that. Did you get new brake clips? Trying to locate the single and double clips.

Chasing Rust
  Reply
#7
Yes, AMK has a kit with brake and fuel line clips. Check with Don at OMS he has AMK products available.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#8
jeff8877;159976 Wrote:Couple more that may answer your questions...I just got done replacing all mine and was really glad I took all the pics.

Jeff

[Image: 118k1g9.jpg]

[Image: 2z9cndf.jpg]

[Image: 282e4g.jpg]

That's a huge help. Thanks

Chasing Rust
  Reply
#9
bkdunha;159986 Wrote:Here are a couple more.

Front





Rear

Did the trans line strapped to the brake line on the drivers side come with the new trans lines? I'm not seeing the piece in any pictures of the new trans lines I'm looking at to purchase. Are there two lines in the kit? I think there may be a rubber hose connection? Also did you get the vent gas line strapped to the firewall with the brake line going to passenger side in a kit with the gas line?

Thanks,
D. Rolls

Chasing Rust
  Reply
#10
(01-02-2014, 11:57 AM)bkdunha Wrote: Here are a couple more.

Front





Rear

Oh, I wish I had looked for this posting before attempting to install the front to rear brake line on my 71' Mach 1.  The line I have appears to be several inches too long. Also, I was attempting to route the brake lines based on the orientation of the line clips already installed.  Looking at your photos I see that your clip are positioned differently. 
I over bent one of the ninety degree bends in my attempt to get the line to fit. I'm going to order another line and follow your routing path. Could you please tell me what manufacturer produced your front to rear line. 

Thanks
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  I fixed my emergency brake today downwardspiral 3 196 06-19-2018, 05:32 PM
Last Post: downwardspiral
runninpony Russell SS Brake Hoses NOT A T5 4 256 06-06-2018, 12:04 PM
Last Post: Hemikiller
  Reman Power Brake Booster Slack. 72 H-code 9 240 06-04-2018, 11:13 AM
Last Post: 72 H-code
  Soft Brake Pedal (Circle Track Mustang) jdwest711 16 339 05-23-2018, 11:47 AM
Last Post: Don C
  Brake Fitting size needed jowens1126 5 219 05-13-2018, 08:46 PM
Last Post: jowens1126
  brake drum retainers F-579 1971V8 11 395 05-11-2018, 09:28 AM
Last Post: red351
  front disc brake conversion nailpounder 16 784 05-04-2018, 08:37 AM
Last Post: Stanglover
  Chrome brake booster Christopher Pawlina 2 241 04-24-2018, 03:40 AM
Last Post: NOT A T5



Users browsing this thread: 1 Guest(s)