• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Brake light quick (temp) fix
Wanted some advice before I attempt. 1971 Mustang.

My turn signal switch stopped working and no parts stores in town has one...so I ordered a new one online.

In the meantime I would like my brakes lights to work. Can I bypass the steering column by splicing the wire from the stop light switch directly to the two brake light wires under the dash?

On my model...stoplight switch is light green and brake light wires are orange/blue and orange/green.

I believe this should work...what do you think?

Yes, you would need to tie the orange/blue and green/orange lines to the solid green brake switch line. You'll need to remove those pins from the turn signal switch connector and re-hook up the connector for horns.

Don't forget that if you do this by bypassing the turn signal switch, your turn signal lights won't work.
Good deal...and the new turn signal switch is on its way. Just wanted to make sure my logic was sound on the brake lights.

Thanks, Roddy
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Oil, temp and voltmeter Ryunker 8 214 07-05-2018, 01:39 AM
Last Post: NOT A T5
  1973 Mustang - No brake lights skeet76 10 857 06-05-2018, 11:59 AM
Last Post: skeet76
  Brake light switch and wiring shaheenk 5 337 03-18-2018, 03:56 AM
Last Post: shaheenk
  LED light modification Danno 17 840 02-26-2018, 09:12 AM
Last Post: Stanglover
runninpony front signal light probs CWADAMS 1 254 01-04-2018, 01:03 PM
Last Post: Hemikiller
  Temp warning light colonel 3 554 10-30-2017, 07:26 PM
Last Post: Hemikiller
  Shifter Light jackf 3 845 06-30-2017, 07:35 PM
Last Post: jackf
  Trunk light wiring sdstang 9 926 05-19-2017, 04:02 PM
Last Post: sdstang

Users browsing this thread: 1 Guest(s)