• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Brake booster seal
#1
Anyone know if this plastic seal between the firewall and brake booster is available or reproduced? If so where can I get it? it’s made out of plastic, mine is brittle and falling apart. Thanks Ryan


Attached Files Thumbnail(s)
   

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#2
I've search for this "bio-degradable" plastic thing, with no luck, but my booster replacement came with it.
You could contact booster dewey, as they restore these units, they must have these.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#3
(04-07-2019, 04:58 PM)Fabrice Wrote: I've search for this "bio-degradable" plastic thing, with no luck, but my booster replacement came with it.
You could contact booster dewey, as they restore these units, they must have these.

Is that who rebuilt your booster? That was my plan, to send it to him. I didn’t know if it would  come back with the seal. Thanks, Ryan

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#4
No I wish, for us faraway people, that would become a very expensive booster...
But many US members posted on here that Booster Dewey is the place to go to.

I had to order one else where (and pay 50 extra for recycling ), a tad smaller. Kept the original one full of brake fluid and might try look at it (much) later on.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#5
https://www.cjponyparts.com/power-brake-...973/p/BBS/



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#6
I just sent mine to booster dewey and it came back with the old one they did not replace it.
I am going to try to do my own on the next one. Cost too much to ship and $155 on top of $130 shipping.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#7
(04-07-2019, 09:18 PM)Carolina_Mountain_Mustangs Wrote: I just sent mine to booster dewey and it came back with the old one they did not replace it.
I am going to try to do my own on the next one. Cost too much to ship and $155 on top of $130 shipping.

Wow! $130 for shipping seems kinda high. I thought the website said $25 shipping UPS ground

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#8
(04-07-2019, 08:08 PM)Don C Wrote: https://www.cjponyparts.com/power-brake-...973/p/BBS/

I don’t think this is the seal I need, the one I have is white and is plastic material. This is for my 72 Mach 1. Ryan

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#9
runninpony 
I only paid 20 bucks for shipping my booster, but had to ship it 2 times there and 2 times back because I wanted mine chromed, so 80 bucks total. I don't know why David's shipping his booster cost so much!? 
[Image: IMG-1181.jpg]

71-73 Mustangs never die, they just go faster!
  Reply
#10
you would be better off just getting some gasket material from Ebay and draw it out and cut it with a razor blade. Its not that difficult.

"I drank what?" - Socrates
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
runninpony brake pedal travel NOT A T5 25 1,107 06-16-2019, 06:32 AM
Last Post: NOT A T5
  Vacuum Booster Seal disintegrated Parkka 1 111 05-17-2019, 02:16 PM
Last Post: Don C
  brake light came on John J 4 263 05-08-2019, 10:54 PM
Last Post: Spike Morelli
  Brake Issues Captain Morgan 8 577 05-07-2019, 06:30 PM
Last Post: Captain Morgan
  Front and Rear Disk Brake conversion question vintageman 2 255 04-21-2019, 07:07 AM
Last Post: vintageman
  Rear disc brake conversion issues Erik72 11 720 04-15-2019, 12:26 PM
Last Post: 1973machi
  Rear disc brake conversion :Help ID the calipers Dcueva88 1 251 04-06-2019, 09:17 AM
Last Post: Hemikiller
  Correct Brake Line Kit? rambot 11 372 04-03-2019, 11:50 AM
Last Post: rambot



Users browsing this thread: 1 Guest(s)