• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boss 351 Intake
#1
Intake D1ZX-9425-DA for my NHRA stock eliminator Boss 351 project...must be mint, no grinding
  Reply
#2
They show up on the Boss 351 section of this Boss 302 page but they are usually pricey!

http://www.boss302.com/smf/

Or try these guys - again pricey...

http://www.perogie.com/

Good luck!

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#3
Boss1Ray;212941 Wrote:They show up on the Boss 351 section of this Boss 302 page but they are usually pricey!

http://www.boss302.com/smf/

Or try these guys - again pricey...

http://www.perogie.com/

Good luck!

Ray

Thanks Ray, I am aware that they are made out of gold too, but..... I have to have one as the NHRA did not approve my request to substitute the Blue Thunder
  Reply
#4
Have you tried posting here? http://classracer.com/classforum/forumdisplay.php?f=12

Chuck
  Reply
#5
c9zx;213046 Wrote:Have you tried posting here? http://classracer.com/classforum/forumdisplay.php?f=12

Chuck

Yes, I have tried everywhere, I have got some leads from various folks but still no luck in finding anything anywhere
  Reply
#6
I thought there was 1-2 on eBay a few weeks ago.

Mike
__________________________________
Black 1985 GT
Yellow 1973 Mustang Mach 1
Black 2012 5.0 GT, 6-speed, Brembo brakes, 3.73's
Wimbledon White 1966 F-100 Shortbed Styleside, 390ci, Tremec 3550, FiTech EFI
  Reply
#7
This one is close but it is for a 4300 spreadbore carb. You are wanting the intake that was sold across the parts counter for use with the Holley carb. I only post to help she the difference.

http://www.ebay.com/itm/1971-Ford-351-35...cb&vxp=mtr


Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#8
Boss1Ray;213073 Wrote:This one is close but it is for a 4300 spreadbore carb. You are wanting the intake that was sold across the parts counter for use with the Holley carb. I only post to help she the difference.

http://www.ebay.com/itm/1971-Ford-351-35...cb&vxp=mtr


Ray

yes Ray, that is correct the spreadbore or CA is available from several places...the DA or Holley pattern is impossible to find.
  Reply
#9
I don't know if this guy has what you need but he has lots of performance parts for Ford. SOHC, Tunnel Port 289, 427 etc. I would give him a call.
Greg Shelton 559-333-6013
Good luck,
David
  Reply
#10
DSC Motorsports or Carl's Ford parts have a lot of connections and may be able to help find one. Want ad in National Dragster??? Just a thought. Chuck
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Boss 351 exhaust manifold Bondobax 0 115 05-02-2018, 03:05 PM
Last Post: Bondobax
  WTB Bkue Thunder Intake & Covers 4mm 4 330 03-02-2018, 11:51 PM
Last Post: rotorr22
  [WTB] Two OEM Intake Manifold Bolts 4mm 8 456 02-16-2018, 01:48 AM
Last Post: 4mm
  [WTB] D1ZX-DA Boss intake sdtommy75 2 611 12-19-2017, 10:55 AM
Last Post: got2ride
  WTB 351 valve covers and a distributor Paul of MO 1 284 12-04-2017, 07:49 AM
Last Post: OMS
  [WTB] Performer rpm 7121 intake smacioch 0 198 08-20-2017, 04:23 PM
Last Post: smacioch
Stop [WTB] 302 aluminum intake smacioch 2 296 08-17-2017, 08:44 PM
Last Post: smacioch
  Boss 351 oil pan Bondobax 2 339 08-15-2017, 08:53 AM
Last Post: Bondobax



Users browsing this thread: 1 Guest(s)