• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"Blind" nut installation for mirror
#1
Installing sport mirrors on my '72. The left side already has the blind nuts installed in the correct locations, the right side does not. I ordered the AMK mounting kit from CJP. 
I saw in a video that there is a "tool" to install these nuts. It looked like just a series of hardware (nuts, washers and a bolt), to squeeze the nut into place. 
If possible, before I screw up the installation, I would like drill sizes, what hardware I'll need for this "tool", and measurements of where to drill the holes, although I could probably get those from the other door...................Thanks
  Reply
#2
Harbor Freight sells a rivet nut installation tool for about $22.

https://www.harborfreight.com/45-piece-t...-1210.html

It's not awesome, but it'll do the job perfectly for the first dozen inserts.

Can't help you with the drill sizes, but I'd just measure the inserts when you get them from CJ with a dial caliper and use a bit that's just a few thousands larger.


  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1973 Non-Staggered Shocks Rear Sway Bar Installation clevelandcoupe 1 166 03-10-2019, 09:28 PM
Last Post: Hemikiller
  grille trim removal and installation rjpohl 7 473 02-13-2019, 08:47 AM
Last Post: mustang7173
  sport mirror location rjpohl 5 392 01-23-2019, 11:21 AM
Last Post: Stanglover
  Sport mirror Ryunker 3 422 06-16-2018, 09:41 AM
Last Post: Stanglover
  Body Stripe Installation Paul113 6 703 05-30-2018, 10:16 AM
Last Post: eddyw
  Sport Mirror Cable Routing kcmash 2 448 03-04-2018, 04:00 PM
Last Post: kcmash
  drivers inside remote mirror nut delawarebill 8 1,077 11-08-2017, 04:46 PM
Last Post: delawarebill
  Front fender splash shield installation Paul113 2 1,062 06-14-2017, 08:33 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)