• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Backwards spoiler
#1
OK so I tried to flip my backwards spoiler around.

What am I missing in how to take it off the posts?

My spoiler is one of the aftermarket ones......and looks like all you have to do is undo the two bolts that hold it onto the posts and lift. Well I tried that and its on there tight......is there another screw somewhere or do I have to undo the posts and change them around also?

[Image: 1_14_01_12_10_54_29.png]

Ken

73 Convertible 302-4v-3spd yellow /white int

08 Bullitt 4.6-5 spd black/black int


All I ask is a chance to prove that money can't make me happy
  Reply
#2
I believe you have to undo the post and change them as well

[Image: 2zdx09d.png]
Yea,Tho i cruise through the valley of the shadow of rice,I will fear no Turbo,For Torque art with me.Thy rods and crankshaft,they comfort me. Big Grin Robert
  Reply
#3
There may be an adhesive gasket holding it on as well. Should only have the two bolts on each pillar holding them... Once nuts are clear, may try to GENTLY tap on them and see if you can get some spacing between pillar and trunk top. If you must pry, make sure to pad painted surfaces well and do so carefully.

1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


President
Central Missouri Mustang & Ford Club
  Reply
#4
whitesoc;24030 Wrote:OK so I tried to flip my backwards spoiler around.

What am I missing in how to take it off the posts?

My spoiler is one of the aftermarket ones......and looks like all you have to do is undo the two bolts that hold it onto the posts and lift. Well I tried that and its on there tight......is there another screw somewhere or do I have to undo the posts and change them around also?

To take spoiler off the post My factory spoiler had 6 screws on each post attaching it to spoiler as well as the aftermarket one i purchased

[Image: 2zdx09d.png]
Yea,Tho i cruise through the valley of the shadow of rice,I will fear no Turbo,For Torque art with me.Thy rods and crankshaft,they comfort me. Big Grin Robert
  Reply
#5
thundertc64;24059 Wrote:
whitesoc;24030 Wrote:OK so I tried to flip my backwards spoiler around.

What am I missing in how to take it off the posts?

My spoiler is one of the aftermarket ones......and looks like all you have to do is undo the two bolts that hold it onto the posts and lift. Well I tried that and its on there tight......is there another screw somewhere or do I have to undo the posts and change them around also?

To take spoiler off the post My factory spoiler had 6 screws on each post attaching it to spoiler as well as the aftermarket one i purchased

Robert is correct on the wing brackets. There are three screws per plate, and one plate on each side that holds wing to pillar. One would think it would be MUCH easier to pull the whole wing assemby off, verify wing and pillar direction, and then remount.

1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


President
Central Missouri Mustang & Ford Club
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  71 hood and spoiler 71 mustang 429cjscj 3 313 02-05-2018, 11:30 AM
Last Post: Carolina_Mountain_Mustangs
  Paint the front chin spoiler? arizonajack 2 285 01-08-2018, 01:56 AM
Last Post: arizonajack
  FRONT SPOILER abs OR FIBERGLASS? NG8264723 11 1,096 07-15-2016, 03:13 AM
Last Post: Carguy4sp
  rear spoiler help Tnfastbk 35 12,958 11-02-2015, 05:01 PM
Last Post: Carolina_Mountain_Mustangs
  Correct Rear Spoiler Position Biskit73 20 2,943 10-31-2015, 07:50 AM
Last Post: mpbsr
  Correct Rear Deck Spoiler Angles. Austin Vert 25 5,836 05-10-2015, 05:13 PM
Last Post: Spike Morelli
  How to tell a real mustang spoiler sdstang 16 1,829 09-15-2013, 09:31 AM
Last Post: OMS
  REAR DECK LID SPOILER......SHOW CORRECT IN EVERY WAY!! hyena429 13 1,776 09-14-2013, 01:11 PM
Last Post: hyena429



Users browsing this thread: 1 Guest(s)