• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Back seat insulation
#1
Thanks to all that sent replies to my Speaker question. Now a new one, Looking to replace the padding/insulation behind the back seat. Can't seem to find something close to original. Does anyone have a supplier that they have used? Thanks
  Reply
#2
There was no separate piece of insulation behind the seat. All there is will be what padding is in the seat back itself. On a convertible there are a couple pads on top of the wheel house to protect the top well liner when the top is down.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#3
I used DynaShield. To finish the cut edges after it was installed (which are present in the photo), I used a wood burning wand and ran it around the outer edge.
[Image: IMG-20180825-130259327.jpg]

aluminium nitrat
  Reply
#4
I just bought a big roll of 1/2" Jute and cut a piece that "fit" behind my back rest portion, You can kind of see what the shape needs to be.
[+] 1 user Likes Omie01's post
  Reply
#5
(02-11-2019, 08:29 AM)Omie01 Wrote: I just bought a big roll of 1/2" Jute and cut a piece that "fit" behind my back rest portion, You can kind of see what the shape needs to be.

Same here. 1/2" jute carpet underlayment with the moisture barrier works very well.


  Reply
#6
Here's what I did on my car. Insulate the heck out of it all over! Kind of wish I'd spent a bit more money and gone with Dynamat or similar, but this is 1/2' thick jute type backed with aluminum. I also fitted a piece behind the springs of the back rest, but no pic of that.
Geoff.


[Image: IMG-3275.jpg]

I learn something new every day!
  Reply
#7
I used that stuff for insulating heating/cooling ducts.
The silver stuff, comes in a role at local hardware store.

mike

[Image: 1_11_11_13_11_50_27.png]
  Reply
#8
My old 72 had jute with black thin plastic sheeting glued facing the trunk side. It was hung on seat back hooks. Its still there today, but I'm no expert.
  Reply
#9
I used some Dynamat in my car, my only issue with it is that it really STICKS!! I had to undo a little bit of it and it was a pain in the a$$!! As long as your car stays dry, there is no reason to over-do it!! Clearance in most areas is not a problem.
  Reply
#10
runninpony 
I used X-Mat on my Convertible, most if not all is covered with it. X-Mat is about half price compared to Dyna-Mat.

71-73 Mustangs never die, they just go faster!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  How does the rear seat back come out with fold down Carolina_Mountain_Mustangs 2 98 02-19-2019, 06:31 PM
Last Post: Carolina_Mountain_Mustangs
  Scott Drake 3 point seat belts 73429mach 18 608 12-07-2018, 10:33 AM
Last Post: Stanglover
  What year seat is this Copestang 8 485 10-27-2018, 10:38 PM
Last Post: Copestang
  Insulation sound deadener 73pony 21 2,417 09-14-2018, 04:54 PM
Last Post: NOT A T5
  Anybody have a drivers side seat bottom frame? scgamecock 2 320 09-10-2018, 08:34 AM
Last Post: scgamecock
  Fold down seat - bolts? Engine302 8 520 08-31-2018, 06:52 PM
Last Post: NOT A T5
  Who has installed thier own seat upholstery? scgamecock 20 900 08-29-2018, 08:13 PM
Last Post: tony-muscle
runninpony Round Seat Belt Warning Light Bezel NOT A T5 1 424 08-27-2018, 09:50 AM
Last Post: NOT A T5



Users browsing this thread: 1 Guest(s)