• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axle housing flange?
#1
I'm looking at a set of brakes for the rear of a '73 Mach-1. When it comes to the axle flange of the 9 inch, what axle flange is it? There's a Big Ford, Big Ford (new style), and a Small Ford.
  Reply
#2
Honestly i wondered the same exact thing, so one day i had the car jacked up and looked back there it looked like either the 8.8 ford or big ford new style. Keep in mind i have an 8 in. So moral of the story. look in the back of the drum you dont have to take off anything just peak your head back there and look at the flange and much it up

1972 Satin Black Coupe, turns better than average, goes vroom with 303 RWHP.
  Reply
#3
8 inch and small 9 inch have the same flange, with bolt spacing of 2"x3-3/8". Big 9 inch are 2-3/8"x3.5", New 9 inch are 2"x3-9/16".



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
I was looking at the kit below for an easy upgrade for my 71 with a 9". Simple bolt on is nice sometimes instead of hunting down all the conversion parts from another ford car.

http://www.ebay.com/itm/261373816640?ssP...1423.l2649
  Reply
#5
I wasn't looking for a bunch of parts, I was looking at a kit from Bear or Wilwood. It's just tjat they asked about the axle flange.
  Reply
#6
Before ordering I would measure, just to make sure. You're going to need to put it on jack stands and pull the axles, anyway, to take the backing plates off. Another indication of flange size, 28 spline axles just come on small flange rear ends.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#7
If the rearend in your car is original to a 1971-1973 Mustang and is a 28 spline unit , then it is a small ford-whether it is an 8" or 9"

I believe this to also be true for 71-73 Mustangs with the 31 spline axles-but cannot say so to the same degree of certainty.

28 spline axles will have a squared off oval cut in the center while 31 spline units will have two round holes in the center

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Brake Register for 9 inch Ford small Bearing Axle mustang7173 8 956 09-07-2017, 11:05 AM
Last Post: Carolina_Mountain_Mustangs
  Rear axle paint? f117rt 4 713 03-13-2016, 09:27 PM
Last Post: f117rt
  Lateral play in rear axle ManniB 6 1,409 05-30-2015, 07:46 PM
Last Post: MeZapU
  9 inch rear axle detailing 73429mach 3 1,166 05-25-2014, 09:38 AM
Last Post: c9zx
  Rear axle management Higgins56 13 1,557 07-29-2013, 12:49 AM
Last Post: Higgins56
  New rear axle rubber bumpers - is there a trick to install? Spechti 5 1,072 07-02-2013, 04:54 PM
Last Post: 72HCODE
  Rear Axle Brake-line Distribution Block Mister 4x4 5 2,119 09-29-2012, 08:51 PM
Last Post: RacerX
  REAR AXLE SMOOTHING & PAINT Qcode351mach 12 2,791 04-18-2011, 10:41 AM
Last Post: MrMach71



Users browsing this thread: 1 Guest(s)