• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Are the seat rubbers available to buy new
#1
I noticed today when i fold the seat back forward there are 2 rubber stops still on the back part of the passenger seat. The seat back sits on these rubbers when put back in the upright position.
The rubbers are still present on the passenger side but missing from the drivers side. I want to replace all 4 rubbers if they are still available.
Anyone know if they are available?

Steve
1971 Grandé
  Reply
#2
(06-10-2018, 03:02 PM)Pegleg Wrote: I noticed today when i fold the seat back forward there are 2 rubber stops still on the back part of the passenger seat. The seat back sits on these rubbers when put back in the upright position.
The rubbers are still present on the passenger side but missing from the drivers side. I want to replace all 4 rubbers if they are still available.
Anyone know if they are available?

I think this is what you are looking for.

John J

https://www.cjponyparts.com/scott-drake-.../p/HW3170/
  Reply
#3
Thats what i am looking for.
Thank You John J

Steve
1971 Grandé
  Reply
#4
runninpony 
Steve-Wonkey Donkey, I recommend you do not buy them! It's another Scott Drake reproduction part that doesn't fit!!! The 4 per seat original plastic/nylon spacers are round! Drake's POS are rubber and 2 are round...too tall!!! 2 are oval...WTHell! When installed you won't be able to latch your seat back, ask me how I know. 
I got some nice stainless steel radiator support rubber bumpers from Drake but only half of the needed hardware comes with it! Bloody Hell!!!
  Reply
#5
One trick I learned was to cut them down to increase the backward lean in the seat. I'm tall with long arms so it made for a more comfortable reach to the steering wheel (factory setup had me too close to it). When my wife drove the car, I dropped a couple plumbing PVC 3/4" caps over the spacers which positioned the seat perfect for her. I've also stacked large washers to get the lean I wanted.
  Reply
#6
I used the SD brand ones, they are the same height as the originals when stacked together, but they don't work the same. I am using them with no problems so far.
  Reply
#7
Thanks for everyones input
The 4 rubbers are still there on passenger side.
The 2 on the drivers upright back of the seat are still there.
Its the 2 on the drivers side bottom of the seat that are missing.
I will purchase the set and just use the two needed but i will remove passenger side ones and use those as a template to make the new ones the same height.

Steve
1971 Grandé
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Where can I buy these nuts? Fabrice 4 363 07-16-2018, 10:12 AM
Last Post: OMS
  Where to buy Instrument Cluster Circuit Board With Tachometer 1971-1973 scgamecock 4 664 03-04-2018, 04:08 PM
Last Post: nailpounder
runninpony Seat Track Clips/Gliders NOT A T5 3 382 01-30-2018, 05:50 AM
Last Post: NOT A T5
  What is this under my seat? andy72 5 645 03-19-2017, 07:38 PM
Last Post: andy72
  Part name and where to buy Pegleg 12 1,471 11-21-2016, 08:51 AM
Last Post: OMS
  please help/seat belts Fraz2112 4 571 10-09-2016, 04:07 PM
Last Post: Mister 4x4
  Parts not to buy John J 14 2,132 06-02-2016, 10:38 AM
Last Post: OMS
  Parts to buy video John J 2 697 06-01-2016, 12:02 AM
Last Post: rocket366



Users browsing this thread: 1 Guest(s)