• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Are 73 bumper brackets adjustable?
Car is back from paint. 
Putting the front bumper back on and it was always too far out from the fender indents. 
Can the bumper bracket/ absorber be adjusted?
Assuming you are using all the stock mounting hardware. You can adjust it left to right on the cross- member and a little play up and down, but unfortunately not forward and back. Can you post pictures of the gap and where the bumper extensions bolt to the frame?
I had the same issue on my 73 Mach 1. I reamed out the bracket to frame rail holes so I was able to get some back and forth adjustment.

1972 Q Code Convertible
If you measure to see how much movement you need and remove the bumper, then you could just whack the ends of the bumper supports with a maul or a sledge hammer until the rubber compresses enough to get the movement you need. Just don't overdo it.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  The beginning / Front bumper Machvince 12 454 03-19-2019, 01:05 PM
Last Post: Machvince
  71/72 Bumper on a 73. (How Im making it work) JRANGER 21 1,474 02-26-2019, 12:45 PM
Last Post: JRANGER
  Mach1 rear bumper tawod 10 602 12-17-2018, 08:31 AM
Last Post: OMS
  73 front bumper rjpohl 6 454 11-10-2018, 08:54 AM
Last Post: Carolina_Mountain_Mustangs
  1973 Front bumper mounting hardware 73droptop 4 435 08-15-2018, 06:04 PM
Last Post: rackerm
  Hood Bumper Hardware kcmash 6 788 04-01-2018, 11:12 PM
Last Post: tony-muscle
  Urethane Bumper Replica rotorr22 18 1,850 02-01-2018, 02:39 PM
Last Post: luxstang
  How do you remove the Chrome Front Bumper on a 71? jowens1126 7 979 12-12-2017, 08:05 AM
Last Post: Omie01

Users browsing this thread: 1 Guest(s)