• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AOD Trans crossmember
#1
I was planning on a Ron Morris crossmember for the AODE I intend to install. In my build post, Eric mentioned that the one he bought didn't fit. Is there a different one out there that others have had good luck with?

Eric, how much modification did you have to do to your original?
  Reply
#2
I would do some checking. It was my understanding that the stock FMX crossmember fits the AOD. I had read this in a couple of places.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#3
Not horribly so.  Just had to notch it a bit to clear the AOD's pan.

Here's how poorly the Ron Morris bracket fit:

[Image: attachment.php?aid=31159]

Here's the notch I made in the FMX cross member:

[Image: attachment.php?aid=31160]

And it fits just like it's supposed to:

[Image: attachment.php?aid=31161]

Since the cross member is 'U' shaped, there's plenty of meat left for the bracket to maintain its integrity.

Hope that helps!

Eric

[Image: mach1sig2.gif]
  Reply
#4
Nope, the one from the FMX does not fit!
Here's what I used and it was a perfect fit and very sturdy at that!

https://transmissioncenter.net/shop/cros...nsmission/

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#5
(12-06-2018, 12:08 PM)luxstang Wrote: Nope, the one from the FMX does not fit!
Here's what I used and it was a perfect fit and very sturdy at that!

https://transmissioncenter.net/shop/cros...nsmission/

Do you not see my pictures with my original FMX cross member installed (after I notched it)?  whistling  Cool

I actually picked up that Ron Morris cross member (first pic) from PATC when I ordered my stuff.  If they would've had the bracket you have available, I would've gotten one of those instead.

Eric

[Image: mach1sig2.gif]
  Reply
#6
Thanks guys. I have updated my material list to the one Mike used.
  Reply
#7
Thx Eric for posting that info/picts.
From what I see on the link, for the +-€250 it would cost once at my door, when I'l install mine, I'll either make one or do the cut it as you did.
It's strange tho, just like @73pony, when I did some research on the subject, I've red many times that the original FMX fits with no mod.
Are there diffs in AOD shapes/bodies?

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#8
My pleasure!

I agree - for that kind of money, I would just modify the FMX cross member and go from there.  You might improve on this by welding another layer of metal to the flat part of the bracket, as well as trim the edge on the right side of the notch (in the picture... it would actually be the driver side), since it rides a little close to the side of the transmission pan.

[Image: attachment.php?aid=29501]

It doesn't actually touch, but it's really close.  I haven't seen any evidence of touching, but when I get a chance, I'll be trimming off the edge a bit.

Plus, I think it might be almost impossible to pull the pan without supporting the transmission and removing the cross member... let alone getting to that last bolt. rofl

Eric

[Image: mach1sig2.gif]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1971 FMX to AOD Conversion tfowler9 21 1,597 09-10-2018, 10:08 AM
Last Post: Don C
  Trans Wiring - ID and Bypass Neutral Safety Switch TheDude 5 355 08-15-2018, 11:15 AM
Last Post: TheDude
  1971 Trans Am prototype? mwilson7 5 777 01-17-2017, 04:22 AM
Last Post: gpierce
  WTB C6 rear trans fitting - 90 deg elbow Paul of MO 2 581 05-31-2015, 10:15 AM
Last Post: c9zx
  1972 Mach 1 351 CJ with C6 Trans mustang7173 5 933 04-21-2014, 10:32 PM
Last Post: rpmcarter
  71 vert as pace car in 1971 Ohio Trans Am race luxstang 7 1,126 12-08-2013, 10:12 PM
Last Post: caspianwendell
  ford fmx trans rear main seal and identification help mach1000 3 1,318 05-05-2013, 10:56 AM
Last Post: VegasFastback
  Ideas for 71-73 trans am styled racer strokermax 6 2,370 02-05-2013, 06:52 AM
Last Post: Boss1Ray



Users browsing this thread: 1 Guest(s)