• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anyone running Flowmaster 15807 2.5" tailpipes?
#1
Anyone running Flowmaster 15807 tailpipes?

So far I am not too excited about any of the local muffler shops, and was thinking about getting the Flowmaster tailpipes as a starting point to fabricobble an exhaust system together.  Just looking for any photos and how tight they are near the tank sender.

Thanks!
  Reply
#2
using 2.5's but they're the pypes pipes.
  Reply
#3
I have them. Each side was cut into two pieces and custom installed by the local custom exhaust shop to clear the staggered shocks and sway bar. Chuck
  Reply
#4
Had them on two 71-73s, they fit great as long as you don't have staggered shocks, as Chuck mentioned. I made the exhausts from them , Flowmasters on one and Super Turbos on the other. Had a shop fab up the midpipes and I put the crossover in myself.


  Reply
#5
(11-16-2018, 01:26 AM)libram Wrote: using 2.5's but they're the pypes pipes.

I have the same set-up with the X-pipe.

[Image: attachment.php?aid=29501]

[Image: attachment.php?aid=29507]

[Image: attachment.php?aid=26945]

Eric

[Image: mach1sig2.gif]
  Reply
#6
(11-16-2018, 11:16 AM)Mister 4x4 Wrote:
(11-16-2018, 01:26 AM)libram Wrote: using 2.5's but they're the pypes pipes.

I have the same set-up with the X-pipe.

[Image: attachment.php?aid=29501]

[Image: attachment.php?aid=29507]

[Image: attachment.php?aid=26945]
Looks like you only have one rear shock in the pic??
I have flowmaster on 73 I believe but the PO had put huge Chrome tips on and now I cannot put trailer hitch on. I also bought the crashed vert that had the Pypes system on it that fit well they did have to shim the stiffiner plate under the vert to clear the Pypes system. After they clamped in they welded so is one big complete system now. I got off in one piece.

[Image: 100-2889.jpg]

[Image: 100-2908.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#7
These pics were taken some time in 2012-2013 while I was still putting it all back together.  There were a lot of things I didn't have on the car at the time... fenders, hood, glass, seats, interior trim, paint, etc. Wink whistling  rofl


I recently had the clamps removed between the mufflers and headers to have those joints welded up. The exhaust shop also put on some proper hangers (instead of those cheesy universals that I bought separately) and installed an O2 sensor bung in the passenger side collector adapter for the FI system (coming soon, hopefully).

Eric

[Image: mach1sig2.gif]
  Reply
#8
Excellent.

Appreciate the photos!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  What FI systems are you guys running? scgamecock 1 201 11-11-2018, 02:43 PM
Last Post: Don C
  1973 351 C running hot issues Carolina_Mountain_Mustangs 27 1,296 08-08-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs
  Feels like its running out if gass?? waterlife 42 1,657 05-03-2018, 09:48 PM
Last Post: Studdley
  Throttle Bar??? Car stopped running. Knoxville72Stang 3 739 10-29-2017, 07:19 AM
Last Post: delawarebill
  New 393C running, Won't Rev Beyond ~3500 RPM Casey72 127 7,507 06-03-2016, 11:26 AM
Last Post: Casey72
  New engine Running Omie01 10 1,601 04-18-2016, 09:37 AM
Last Post: jbojo
  351C 4V running rough digithead 20 2,730 02-13-2016, 11:37 AM
Last Post: Paul of MO
  issue with tuning holley carb/ 351c running rough 87fox72mach 18 2,852 10-18-2015, 01:38 PM
Last Post: will e



Users browsing this thread: 1 Guest(s)