• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Any experience with these roller lifters?
#1
My first question is do 221-302 and 351W share the same lifter as the 351c?

Anyone have any experience with these.  I have had recommendations for using Morrel's.  They are only about $25 more.

https://www.jegs.com/i/Lunati/638/72335-...etargeting

Thanks!
Wade
1972 Mach 1 351 cj 4speed
"We confide in our strength, without boasting of it; we respect that of others, without fearing it."--Thomas Jefferson

  Reply
#2
scgamecock, the short answer for question #1 is yes.
The early 221-260-289-302 used C2OZ-6500-D lifter which was replaced by the 351C lifter in 1970. The same lifter was also used for the 351M, 400, 429 and 460 engines. The 370-429 heavy truck 385 series engine lifter (D9HZ-6500-A) replaced all previous part numbers and remained in use until the 385 engine production came to an end in 1997.  
The only roller lifters I've personally used are the Ford units in a HO 5.0.   I have had some friends use the Lunati lifters when retrofitting  some 351C and W engines. To my knowledge they have not had any problems. Some members here such as Hemikiller or DonC may be more familiar with these lifters and if they are actually made by Morrel's  as I have heard.

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#3
I have those in my engine. They are indeed made by morel.

John
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony roller rockers/studs NOT A T5 17 720 09-16-2018, 10:14 AM
Last Post: NOT A T5
runninpony roller rockers NOT A T5 15 585 08-05-2018, 09:59 AM
Last Post: tony-muscle
  Comp Cams Hydraulic Roller Conversion question 73pony 31 2,813 06-08-2017, 06:07 AM
Last Post: turtle5353
  Special 351C solid lifters c9zx 3 769 12-13-2016, 08:22 PM
Last Post: Boss1Ray
  Installing & Adjusting the Lifters timsweet 15 1,384 11-23-2016, 02:23 PM
Last Post: Mister 4x4
  Noisy Roller Valve-train? Omie01 11 1,665 10-08-2016, 07:15 AM
Last Post: Omie01
  Anyone with experience with MSD, FAST or HOLLEY EFI? 4mm 18 5,094 02-01-2016, 09:38 PM
Last Post: 4mm
  Hyd Lifters clevelandcoupe 5 735 09-11-2015, 10:53 PM
Last Post: barnett468



Users browsing this thread: 1 Guest(s)