• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A/C vent replacement
#1
Hi all, has anyone had the pleasure of replacing the LH A/C vent on a 72 Grandé?? Mine is broken and looks really bad. I've searched the web but was unable to find any reference for the replacement.  So, I was hoping that, by luck, someone out there in mustang land, had the displeasure of replacing one. There's no problem obtaining the vent, there are many sources. Any help would be appreciated.  Thanks. Thankyouyellow
  Reply
#2
(04-21-2018, 10:45 AM)rudyck Wrote: Hi all, has anyone had the pleasure of replacing the LH A/C vent on a 72 Grandé?? Mine is broken and looks really bad. I've searched the web but was unable to find any reference for the replacement.  So, I was hoping that, by luck, someone out there in mustang land, had the displeasure of replacing one. There's no problem obtaining the vent, there are many sources. Any help would be appreciated.  Thanks. Thankyouyellow

The louver vent section sits inside the housing by a tab on the top and bottom
You can use a small flat screw driver to lift the tab enough to clear its hole, on the top - then bottom, then slowly work it out
Not sure if the repro louvers are the exact same size - so do not know if they will fit the old housing.

Otherwise you need to remove your instrument bezel 
4 screws for the steering column cover
3 screws for the trim plate on the side of the dash
5 screws for the instrument bezel  [ 3 on top 2 on bottom ]
You may need to lower the steering column to get the bezel out - sometimes they clear - sometimes not
Then you can replace the vent and housing

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#3
Thanks for the information. I will try the pry method first, if I break it, so what, it needs replacing anyhow. I don't look forward to the second method, but at least now I know what is involved. Thanks again for your assistance.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  FMX transmission shifter seal replacement how to mach1000 15 5,754 01-20-2019, 04:08 PM
Last Post: Rbouwma
  Direction's flector replacement Jean-Pierre 4 239 01-19-2019, 12:10 PM
Last Post: thomas1984
  429 fan shroud replacement mustangandy 2 244 10-19-2018, 03:21 PM
Last Post: mustangandy
Stang Water pump replacement Plywood50 8 685 05-23-2018, 10:27 PM
Last Post: EBSTANG
  hood hinge replacement nailpounder 9 1,101 03-22-2018, 08:46 PM
Last Post: MustangChris
Wrench 351W/408 Oilpump replacement lldoor 3 602 01-25-2018, 11:44 AM
Last Post: rotorr22
  HVAC replacement vacuum lines. Confused..... scgamecock 8 1,022 01-05-2018, 08:48 AM
Last Post: Hemikiller
  1/4 window weather strip replacement ? nailpounder 7 1,035 12-11-2017, 07:53 PM
Last Post: nailpounder



Users browsing this thread: 1 Guest(s)