• 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
73 Mach1 Project
#41
Looking good and some quality work done
Seems like you have got the wiring sorted out
I put mostly LED globes throughout and upgraded the headlight wiring with relays and H4 beams, work much better now
Like the shorty headers which should work well with your combo
Keep up the good work and you will be cruising in no time at all
  Reply
#42
Despite the heat I have managed to do more on the dash and gauges. It's all ready for assembly. I replaced the amp meter with a digital voltage gauge.

The central gauges have been re-aligned to the right to suit the RHD conversion.

[Image: 20191209-124737.jpg]

[Image: 20191209-124924.jpg]

[Image: 20191209-124555.jpg]

[Image: 20191207-093918.jpg]

[Image: 20191209-131813.jpg]

New Glovebox. I re-used the existing staples. 

[Image: 20191209-134410.jpg]
  Reply
#43
A new RH linkage for the transmission/ignition lock has been finished and installed.

[Image: 20191201-114003.jpg]

wh auden the unknown citizen analysis
  Reply
#44
Looking good
Like what you did to re-orient the central gauges
I didn't do this to mine and although the gauges slant to the left I can still read them well enough
  Reply
#45
Despite the ongoing hot weather, 44 degrees C in the shade a couple of days ago (46.5 degrees C in the workshop), I have finished the dashboard and re-wiring all the gauges, lights, etc.

[Image: 20191219-115713.jpg]

[Image: 20191219-115838.jpg]
[+] 1 user Likes Aus73Mach1's post
  Reply
#46
Update.
Wiring now complete. All harnesses to dashboard, etc finished. I reconnected the key and headlight buzzers even though the new harness assumed a ground point at the door courtesy light switches so I changed this to powered contacts. All this has been difficult with continuing temperatures over 35 degrees C and + 65% humidity.

Before

[Image: 20200116-174603.jpg]

After

[Image: 20200117-144234.jpg]

[Image: 20200117-144247.jpg]
[+] 1 user Likes Aus73Mach1's post
  Reply
#47
Engine bay almost finished. Radiator is off getting an updated re-core.

[Image: 20200128-163624.jpg]
[+] 1 user Likes Aus73Mach1's post
  Reply
#48
Now working on final touches to the various body panels ready for painting.

[Image: 20200128-163322.jpg]
[Image: 20200128-163339.jpg]
[Image: 20200128-163407.jpg]
[+] 1 user Likes Aus73Mach1's post
  Reply
#49
Radiator is back with the new core and came painted in 2 pack gloss black, so ready to bolt straight in.

[Image: 20200221-074206.jpg]

[Image: 20200221-074323.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1973 "Pro-Touring" project - Creator protouringstang73 567 55,573 02-19-2020, 01:34 PM
Last Post: protouringstang73
  92 GTS-Rs Project Thread 92GTS-R 7 504 02-04-2020, 07:20 PM
Last Post: c9zx
  Slowest resto ever - Project AmsterFoose Vinnie 120 6,665 02-04-2020, 04:51 PM
Last Post: Vinnie
  Fabrice's 429CJ 71 project Fabrice 444 29,325 02-03-2020, 04:09 PM
Last Post: Fabrice
  71 fastback project rigotti76 42 2,531 01-27-2020, 11:18 AM
Last Post: 72Mach168Cam



Users browsing this thread: Carolina_Mountain_Mustangs, 2 Guest(s)