• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
73 convertible top
#1
Hello all -

I recently removed the vinyl off the top and all I have left is the frame. Everything is still attached to the body. My question is this - does anyone know how to retract the frame so it is out of the way? I seem to be able to get it to lift maybe a quarter of the way, though cannot get it to go any further.

I don't want to totally remove the frame, just want to get it in the down position. There is no electricity available to operate the switch, and the engine has not run in close to 20 years.

Thanks!

Joe
  Reply
#2

first oil every pivot and let it soak

with no power you may have to loosen the hose fittings and lose fluid to get it to go

run power wire off of a battery to motor wire

Ohio Mustang Supply
440-949-2556

VISIT US ON THE WEB AT
www.ohiomustang.com

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#3
Pull the pins at the top of the hydraulic cylinders. Fold it down. You may need new cylinders in any case since the seals dry up over time.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
check Sound off if you have a convertible Don65Stang 201 33,248 02-03-2019, 09:09 PM
Last Post: Don65Stang
runninpony Convertible Top Bumpers NOT A T5 8 663 09-27-2018, 05:34 PM
Last Post: NOT A T5
  Convertible frame adjustment Three Ponies 17 1,585 08-28-2018, 05:52 AM
Last Post: NOT A T5
  Parcel shelf in convertible / material Nige 9 708 07-25-2018, 06:34 AM
Last Post: luxstang
  White convertible top John J 3 544 06-27-2018, 01:44 PM
Last Post: Bill73Ragtop
  Convertible Roll Bar Bill73Ragtop 3 580 06-03-2018, 11:29 AM
Last Post: Carolina_Mountain_Mustangs
  Convertible Rear Tack Strips Three Ponies 4 909 02-02-2018, 05:30 PM
Last Post: Three Ponies
  what Color is your 7123 Convertible? Don65Stang 47 9,067 01-05-2018, 02:56 AM
Last Post: Duck



Users browsing this thread: 1 Guest(s)