• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
72 Mach 1 Sail Panels
#1
I am finishing up on 3 or 4 year restoration of a 72 Mach 1. I am down to the sail panels and I'll be done. Course, I can't remember how everything goes back in. Does the package tray go underneath the lower sail panels or just butt up against them? It seems either way, I'll need to trim the new package tray. Also, the material on top of the new upper sail panels is lose and not glued like the other three sides of the sail panels. Does this go under the weatherstriping of the back window and do you just turn under the part after it leaves the window and glue it to the back side of the sail panel? Pictures would be appreciated. I also would like a picture of the headliner trim piece on the back window.
72 Q Code Mach 1, 351C, Toploader.
69 Torino GT Convertible, 351W, FMX
03 Anniversary Harley Davidson
31 Deluxe Tudor
91 F350 Lariet Crewcab 4x4, 460, automatic
2012 Escape 4x4
92 Feature Edition Mustang
82 F100 Shortbed
  Reply
#2
oldmountainfarm;97041 Wrote:I am finishing up on 3 or 4 year restoration of a 72 Mach 1. I am down to the sail panels and I'll be done. Course, I can't remember how everything goes back in. Does the package tray go underneath the lower sail panels or just butt up against them? It seems either way, I'll need to trim the new package tray. Also, the material on top of the new upper sail panels is lose and not glued like the other three sides of the sail panels. Does this go under the weatherstriping of the back window and do you just turn under the part after it leaves the window and glue it to the back side of the sail panel? Pictures would be appreciated. I also would like a picture of the headliner trim piece on the back window.

These may help. I'll try to find more if you need them. E mail me at c9zx@cox.net if you need more pictures, it is easier for me to email them. Chuck


Attached Files Thumbnail(s)
       

.jpg   package tray .jpg (Size: 32.52 KB / Downloads: 140)
  Reply
#3
Thanks for the reply. I'll email you. When I put the package tray under the lower sail panel, it makes the lower sail panel stick up higher than the rear 1/4 panel cover.

            There is not much room to get the package tray under the lower sail panel. Also this is the picture of the material I'm talking about on the upper sail panel. Then there is this gap between the rear 1/4 panel cover and where the seat goes where you can see right into the trunk.

    Here's another picture of the gap.
72 Q Code Mach 1, 351C, Toploader.
69 Torino GT Convertible, 351W, FMX
03 Anniversary Harley Davidson
31 Deluxe Tudor
91 F350 Lariet Crewcab 4x4, 460, automatic
2012 Escape 4x4
92 Feature Edition Mustang
82 F100 Shortbed
  Reply
#4
Just took these, not greatest quality but, may help. Chuck


Attached Files Thumbnail(s)
               
  Reply
#5
Thanks, these are a lot of help and it does look like the package tray goes under the lower sail panel, correct?
72 Q Code Mach 1, 351C, Toploader.
69 Torino GT Convertible, 351W, FMX
03 Anniversary Harley Davidson
31 Deluxe Tudor
91 F350 Lariet Crewcab 4x4, 460, automatic
2012 Escape 4x4
92 Feature Edition Mustang
82 F100 Shortbed
  Reply
#6
Correct. Chuck
  Reply
#7
I figured out my package tray was not sitting all the way down because I had not taken out the metal strip behind the back seat. Now it sits like it is suppose to and goes under the lower sail panels correctly. Thanks for all the help and the pictures. I kept looking on you tube and seeing the one on Mach1restoration.com and just knew they were not suppose to be sticking up higher than the rear interior panels like his. Now everything lines up good.
72 Q Code Mach 1, 351C, Toploader.
69 Torino GT Convertible, 351W, FMX
03 Anniversary Harley Davidson
31 Deluxe Tudor
91 F350 Lariet Crewcab 4x4, 460, automatic
2012 Escape 4x4
92 Feature Edition Mustang
82 F100 Shortbed
  Reply
#8
Glad you got it together. Chuck
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Correct Stripes for a 73 Mach 1 pschafer 13 672 10-16-2017, 04:28 PM
Last Post: Carolina_Mountain_Mustangs
  Mach 1 Exhaust Tips: How Far should they extend beyond the rear Valance? griffbl 3 256 08-13-2017, 11:43 PM
Last Post: mach71351c
  NEED ADVICE ON SAIL PANEL INSTALL andy72 16 656 07-21-2017, 06:45 PM
Last Post: andy72
  Sail Panel Install andy72 4 411 05-20-2017, 10:30 AM
Last Post: andy72
  Panel between sail panel and package tray, 1972 fastback Danno 4 398 05-03-2017, 06:29 PM
Last Post: Danno
  Fastback sail panel differences Danno 0 244 04-27-2017, 12:31 PM
Last Post: Danno
  Interior quarter panels 1972 fastback Danno 2 407 04-25-2017, 09:35 AM
Last Post: Danno
  Deluxe Door Panels clevelandcoupe 3 491 04-16-2017, 11:44 AM
Last Post: jeff8877



Users browsing this thread: 1 Guest(s)