• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
71 mustang 351c adding clutch fan
#21
I was looking at my fan clutch and I do have some sort of spacer. I have forgotten about it.
Please look at the picture and tell me if this is normal. If I reduce this spacer or eliminated I should be able to pull the blades back enough. However, they may be too close to the pulleys and belts.
[Image: 20200209-110609.jpg]

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
#22
Nope. that's not normal at all. Clutch bolts directly to the face of the water pump pulley.


  Reply
#23
(02-09-2020, 11:24 PM)Hemikiller Wrote: Nope. that's not normal at all. Clutch bolts directly to the face of the water pump pulley.

Thanks. I guess that explains why my fan is so forward. In a "normal" installation, how close are the fan blades too the pulleys? Once I remove the spacer they will be very close in my case.

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
#24
(02-10-2020, 12:06 AM)tony-muscle Wrote:
(02-09-2020, 11:24 PM)Hemikiller Wrote: Nope. that's not normal at all. Clutch bolts directly to the face of the water pump pulley.

Thanks. I guess that explains why my fan is so forward. In a "normal" installation, how close are the fan blades too the pulleys? Once I remove the spacer they will be very close in my case.
Well, normal blade depth past shroud opening on a FLEX fan is 1/4  width of blade, looking down from above, this allows for flex action to nearly close the gap, proving maximum cooling. Now a clutch fan has no flex, my stock ranger flex fan centered 1/2 enshroud opening.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bearing kit for clutch pedal tony-muscle 28 2,807 04-06-2020, 10:42 AM
Last Post: Manu Mach1
  Malwood hydraulic clutch installed 73' mach 1 0 115 03-22-2020, 03:16 PM
Last Post: 73' mach 1
  Clutch pedal removal 73' mach 1 5 238 03-11-2020, 06:52 PM
Last Post: clevelandcoupe
  351C Q-code reassembled, ready to start it up RC92234 20 858 02-28-2020, 08:12 PM
Last Post: RC92234
  351C Q code: securing the stock coil in the stock bracket RC92234 4 295 02-13-2020, 06:32 PM
Last Post: RC92234



Users browsing this thread: 1 Guest(s)