• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
'71 Mach 1 outer headlight trim rings
Hi all,
Took the headlight trim rings off today (the decorative outer ones, not the ones that actually secure the headlight) to paint them black.  Noticed they were only held on by one screw and when I put them back on they weren’t tightly secured to the grille any more.

Took them off again for a closer look, turns out there is a small tab at the bottom of each ring that fits into a slot in the grille plastic.  However by this stage there was no sign of anything that would hold that tab at the back of the slot to keep the ring tight, so there was either nothing there to start with or whatever it was (spring clip, etc.) had got lost in the removal process.

Any idea what should be there? Have tried Googling without success…

Nope, I have exactly the same issue. The fit is quite wobbly. I haven't lost one so far so I guess it's ok but it strikes me as odd that a part should be held in place by a screw and lots of good luck only.

[Image: 1z21rv4.png]


"If I were you...... I´d rather be me."  Tongue

Check out my video:

Maybe that is why so many have come up missing over the years.

Gotta be aware that there are RH and LH rings. On my car I later found out it had 2 right hand rings.
I will have to look when in garage today. I think the grill is more of a charcoal gray than black isn't it?

When a man is in the woods and talks and no women are there is he still wrong??
There is a left and right, and yes, ONLY 1 screw. The tab on the bottom does very little to hold it in place. But they do Settle after a while. And yes they are originally like a dark charcoal color, but I just painted mine satin black.
When I went to my bin with Grill parts I found a left and right one was black and one was charcoal. Maybe it depends on the package the car came with. I have some pictures. One screw and a locating tab on the other side 180 deg. from screw.

[Image: 100_3345.jpg] More

[Image: 100_3347.jpg]

[Image: 100_3346.jpg]

When a man is in the woods and talks and no women are there is he still wrong??
Yep, have both correct left and right rings (confirmed by part #s underneath) and tabs are in place.

Where the tabs slot into the grille, the slot is much larger than required to fit the tab so it doesn't really do much in terms of holding the trim ring firmly in place. Either I have an aftermarket grille with slots that are too deep or there's meant to be something that fits into the slot to help hold the tab in place.

Will try to get a pic to illustrate what I'm on about.

Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
Wrench Remove odometer knob Mach 1 speedometer BRUINSam 1 162 11-18-2018, 09:25 PM
Last Post: rackerm
  Little issue with the Mach 1 rocketfoot 13 664 09-15-2018, 08:17 AM
Last Post: c9zx
  Proper headlight adjustment Tnfastbk 5 331 08-28-2018, 09:05 AM
Last Post: Don C
  Headlight ring fixings Pegleg 8 482 06-29-2018, 03:34 PM
Last Post: Pegleg
  '71 Mach 1 turn signal problem Heardatbeat 14 598 06-16-2018, 01:56 AM
Last Post: Heardatbeat
  Rear Window Install Mach andy72 7 727 04-11-2018, 08:29 PM
Last Post: andy72
  Windshield Base Trim andy72 8 588 12-20-2017, 12:05 PM
Last Post: Paul of MO
tach 71 Mach tach stopped working danoreilly 2 598 08-05-2017, 09:44 AM
Last Post: Steve73QMach1

Users browsing this thread: 1 Guest(s)