• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
71 9" bearing type.
#1
Anyone know offhand if a stock 9" on a 71 has the Torino style bearings?

Please and thank you.
  Reply
#2
Hi

What do you mean Torino (do you mean Daytona?????)   

Or are you asking if a D0OA case has smaller bearings then a C4AW?

Mark
  Reply
#3
Mustang 9-inch housings have the small axle bearings, same size as the 8-inch bearings. The "Torino" bearings are the large size with a different backing plate bolt hole configuration.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
(08-26-2019, 04:54 PM)SVO2SCJ Wrote: Hi

What do you mean Torino (do you mean Daytona?????)   

Or are you asking if a D0OA case has smaller bearings then a C4AW?

Mark

I was asking if the axle housing is set up with the small bearings or the slightly larger ones that came out on the larger cars, they call them 'Torino style' nowadays I think. Looks like someone had the answer though, and I found an article online as well that says that even the HO came with the small bearing.

Thanks for replying!
  Reply
#5
(08-26-2019, 05:41 PM)Don C Wrote: Mustang 9-inch housings have the small axle bearings, same size as the 8-inch bearings. The "Torino" bearings are the large size with a different backing plate bolt hole configuration.

Thank you!
  Reply
#6
To clarify, there are two large bearing backing plate bolt configurations, the Torino style and the larger style. The small bearing backing plate bolt configuration is smaller than either of the large bearing styles.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bearing kit for clutch pedal tony-muscle 15 1,680 Yesterday, 07:50 PM
Last Post: Boss1Ray
  Clutch Linkage type Bruce180vf 9 529 05-31-2019, 05:25 AM
Last Post: cheezsnake
  Clutch cable, bearing, fork for T56 Magnum TheDude 9 626 01-07-2019, 04:34 PM
Last Post: TheDude
  What type of gas do you run? Fredensborg 18 1,314 07-21-2018, 04:53 PM
Last Post: Mach_One
  Pilot bearing for Toploader 4 snout Higgins56 11 1,765 08-23-2017, 11:02 AM
Last Post: Thomas
  Throw Out Bearing Worn - Replace Whole Clutch? icejawa 15 1,604 08-04-2017, 08:33 AM
Last Post: Stanglover
  1971 351C-2V Piston type klinton994 25 3,473 12-12-2016, 10:34 PM
Last Post: barnett468
  Distributor Rebuild- Bearing Change Out Wolverine 2 735 08-23-2016, 01:44 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)