• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
71-72 Front bumper
#1
Looking for a 71-72 front bumper, swapping it on to a 73 mach 1, doesn't have to be perfect because I'm going to paint it and yes I am aware that the mounts are different, but I'm handy with a welder and grinder

Gas is for cleaning parts, alcohol is for drinkin, nitro is for racin
  Reply
#2
Studdley, assuming your talking about the 71-72 urethane front bumper, those are far and few in between. No repos are available and decent used units are harder to find by the day. Once again I would suggest Don @ Ohio Mustang Supply or Mike @ Motor City Mustang. They both probably get a lot of requests for this bumper so unless they have received any new parts cars they might not have any. Doesn't hurt to ask.
Back around the 8th of this month mwilson7 posted a craigslist ad he had found for some door panels. There was a click box for "More Ads by This User". There is  a urethane front bumper listed with some repairable damage (most of then seem to fall into that category) for a $100.00. He also had a NASA hood and a NOS rear bumper and a few other Mustang items. Shipping from Pa to your location would probably be a deal breaker. Doesn't hurt to look!
https://philadelphia.craigslist.org/pts/...74459.html

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#3
(04-17-2018, 01:25 PM)secluff Wrote: Studdley, assuming your talking about the 71-72 urethane front bumper, those are far and few in between. No repos are available and decent used units are harder to find by the day. Once again I would suggest Don @ Ohio Mustang Supply or Mike @ Motor City Mustang. They both probably get a lot of requests for this bumper so unless they have received any new parts cars they might not have any. Doesn't hurt to ask.
Back around the 8th of this month mwilson7 posted a craigslist ad he had found for some door panels. There was a click box for "More Ads by This User". There is  a urethane front bumper listed with some repairable damage (most of then seem to fall into that category) for a $100.00. He also had a NASA hood and a NOS rear bumper and a few other Mustang items. Shipping from Pa to your location would probably be a deal breaker. Doesn't hurt to look!
https://philadelphia.craigslist.org/pts/...6537874459.
I'm thinking about a chrome bumper

Gas is for cleaning parts, alcohol is for drinkin, nitro is for racin
  Reply
#4
https://www.ebay.com/i/302693657434?chn=...8afffbb686

Granted it is a repop so prob made of slightly thicker metal than tin foil.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
[+] 1 user Likes 73pony's post
  Reply
#5
(04-17-2018, 03:04 PM)73pony Wrote: https://www.ebay.com/i/302693657434?chn=...8afffbb686

Granted it is a repop so prob made of slightly thicker metal than tin foil.

hahaha, was more looking for a cheap, rusty one, so I could sand, paint it, and keep it from the scrap yard

Gas is for cleaning parts, alcohol is for drinkin, nitro is for racin
  Reply
#6
One for sale on FB from Spencer Marshall.

He is also on here but can't remember his username...

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#7
(04-18-2018, 09:41 PM)Boss1Ray Wrote: One for sale on FB from Spencer Marshall.

He is also on here but can't remember his username...

Ray
  Reply
#8
(04-18-2018, 09:41 PM)Boss1Ray Wrote: One for sale on FB from Spencer Marshall.

He is also on here but can't remember his username...

Ray

Is he a midwesterner

Gas is for cleaning parts, alcohol is for drinkin, nitro is for racin
  Reply
#9
(04-18-2018, 09:15 PM)Studdley Wrote:
(04-17-2018, 03:04 PM)73pony Wrote: https://www.ebay.com/i/302693657434?chn=...8afffbb686

Granted it is a repop so prob made of slightly thicker metal than tin foil.

hahaha, was more looking for a cheap, rusty one, so I could sand, paint it, and keep it from the scrap yard

Where are you located ?

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#10
(04-19-2018, 10:35 AM)OMS Wrote:
(04-18-2018, 09:15 PM)Studdley Wrote:
(04-17-2018, 03:04 PM)73pony Wrote: https://www.ebay.com/i/302693657434?chn=...8afffbb686

Granted it is a repop so prob made of slightly thicker metal than tin foil.

hahaha, was more looking for a cheap, rusty one, so I could sand, paint it, and keep it from the scrap yard

Where are you located ?
I'm in Cincinnati

Gas is for cleaning parts, alcohol is for drinkin, nitro is for racin
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Front grille for 1971 Mach 1 ponypastor 0 32 6 hours ago
Last Post: ponypastor
  73 wanted Front hood molding batwrangler 5 358 10-16-2018, 05:18 PM
Last Post: Motorcity Mustang
  71, 72 Front Bumper Studdley 5 210 09-20-2018, 03:49 PM
Last Post: Ed Raver
  [WTB] 1973 Front Bumper Mounting Hardware AOCUSNRET 10 542 08-22-2018, 07:56 AM
Last Post: OMS
  '73 Rear Bumper Guards BRUINSam 10 740 05-12-2018, 09:24 PM
Last Post: Motorcity Mustang
  WTB - '71-'72 urethane bumper bac 27 2,172 01-13-2018, 02:02 AM
Last Post: bac
  chrome bumper overriders Nige 0 280 01-10-2018, 02:58 PM
Last Post: Nige
  WTB front kick panels for 73 convertible colonel 1 341 11-14-2017, 06:22 PM
Last Post: Motorcity Mustang



Users browsing this thread: 1 Guest(s)