• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
4V carb overhaul
#1
I have the kit to overhaul my edelbrock 600CFM carb..When eng. was running I had to dump gas down carb to start. Once running restarted ok unless sat awhile. When I split the housing , only one bowl had gas. Should I soak the carb housing to clean any possible clogged ports, or will new needle and seats correct it?

AlanDodgy Waiting for crank
[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
(10-27-2010, 07:10 PM)not2old Wrote: I have the kit to overhaul my edelbrock 600CFM carb..When eng. was running I had to dump gas down carb to start. Once running restarted ok unless sat awhile. When I split the housing , only one bowl had gas. Should I soak the carb housing to clean any possible clogged ports, or will new needle and seats correct it?

AlanDodgy Waiting for crank

edelbrocks are pretty simple carbs I had the same one on my car years ago, I'd just try cleaning it first.
[Image: 25rnz1y.jpg]

~Buddy
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Carb Rebuild issues, please help! sciabola13 9 201 09-18-2017, 10:27 AM
Last Post: Carolina_Mountain_Mustangs
  4V Carb with 2V Intake 72FastbackWNC 2 268 06-16-2017, 09:00 AM
Last Post: TheRktmn
  carb replacement 71 mustang micali 31 1,568 06-08-2017, 01:11 PM
Last Post: turtle5353
  Fuel line to carb routing. Fredensborg 18 750 03-21-2017, 11:25 AM
Last Post: Stanglover
  New Carb Choice? Omie01 8 687 07-31-2016, 06:41 AM
Last Post: Omie01
  Which carb do i have Pegleg 31 1,489 07-28-2016, 09:27 PM
Last Post: Don C
  Manifold Carb studs Twins 11 867 03-09-2016, 01:30 PM
Last Post: Twins
  Overhaul of a Ford FMX Transmission machmeter1 33 29,276 01-26-2016, 09:01 PM
Last Post: fried_daddy



Users browsing this thread: 1 Guest(s)