• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
4sp Lock out rod stud and nut
#1
Hi,

Can someone post an image of the stud that connects the lock-out rod to the reverse crank on the trans? I think it's a stud that would snap into one of those hard blue or brown plastic bushings. I picked up the lock-out rod but I'm missing the stud and nut.

Thanks,
Peter
  Reply
#2
I recently did this also. Best photo I could find was taken before the lockout rod was connected I never took any photos after this image. I recall the lockout rod is connected using the same stud/fasteners as what connects the shifter rods to the Hurst shifter assembly. Hopefully the picture is useful to you...

If your missing one of those studs perhaps Don@OhioMustang may have one lying around.


Attached Files Thumbnail(s)
   
  Reply
#3
Maybe this picture of a 4 speed will help as it shows the pins (bolts) at the shifter connection. The lock out rod obviously goes on the reverse shift arm in the center of the box, the open hole in other words.
I think you can order these from NPD. I know they have the bushing kits. When you set up your shift linkages, use a 1/4" drill or something to center the shift mechanism. You can see that our friend in the first picture, has a white 1/4" pin or what have you, holding it all in place.
Hope that helps.
  Reply
#4
This is what it looks like !


Attached Files Thumbnail(s)
       
  Reply
#5
Awesome - got it! Thank you!
BTW would you want to sell one of those???
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  kick down lever/steering lock rod/ trans linkage naa10104 4 493 01-18-2019, 03:33 PM
Last Post: naa10104
  Kickdown rod/cable Parkka 5 414 01-14-2019, 10:51 AM
Last Post: Fabrice
  Oil pump rod Robert sneed 12 631 11-13-2018, 06:44 PM
Last Post: jpaz
runninpony SPINNING ROCKER NUT NOT A T5 5 442 07-25-2018, 05:08 AM
Last Post: NOT A T5
  408 Crankshaft with 6.125 rod OzCoupe72 3 880 08-23-2017, 01:27 AM
Last Post: OzCoupe72
  FMX Kickdown rod Odmark 16 2,932 05-14-2017, 07:15 PM
Last Post: Don C
  ARP Rod torque specs york0060 2 843 05-03-2017, 12:51 AM
Last Post: Spike Morelli
  Stock Stroke 351C w/6" rod wrobinson 7 1,668 12-23-2016, 10:34 AM
Last Post: wrobinson



Users browsing this thread: 1 Guest(s)