• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
429cid centerforce bellhousing question
HI all

I decided to change from zoom to centerforce clutch. I heard bad stories from them and they are really really stiff.

I heard about the centerforce that they work pretty well and because i have a centerforce flywheel ill gonna use a c-cluch too.
It will be the dual friction 11" for Sb-ford

They told that they dont fit on a stock bellhousing.
I have a 4spd wide toploader and using a stock clutch fork.

Wich Bellhousing should i use?
And is there a way to install the newer clutch fork that i can use a clutch cable kit instead to a semi-hydraulic?

We recently installed a Centerforce II on my '71 M-code
with wide toploader and it works great. Very smooth
action and predictable. Don't know what they mean by
won't fit a stock housing, my car is pure stock with matching date codes.


[Image: 1_11_11_13_11_50_27.png]
I will try and let you know

Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Toploader question Jeff73Mach1 16 434 10-11-2018, 12:24 PM
Last Post: Jeff73Mach1
  Motor mount vs Frame mount question crzyfun 8 434 09-15-2018, 12:31 PM
Last Post: Don C
  Alignment of bellhousing to engine tony-muscle 0 230 09-12-2018, 01:50 PM
Last Post: tony-muscle
  Last ram air question i promise eventhorizon 9 1,109 07-21-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs
  T-5 trans question vintageman 3 372 07-14-2018, 01:41 PM
Last Post: 73pony
  Distributor Question 73pony 8 486 06-12-2018, 12:55 AM
Last Post: OzCoupe72
  351C Stroker / TKO 600 bellhousing question tony-muscle 11 1,905 03-29-2018, 03:18 PM
Last Post: tony-muscle
  FMX Transmission casting number question? Monterey 6 1,125 03-01-2018, 11:45 AM
Last Post: Vicus

Users browsing this thread: 1 Guest(s)