• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
429 fan shroud replacement
#1
Hi All.

My 1971 429 CJ is missing its fan shroud. It's a non A/C car. I've looked on line and there seems to be two versions that get mentioned:-


D0OE-8146-D and D0OZ-8146-D. I've not been able to find out what differences, if any, there are between these two.

Would anyone know if either will fit? Doesn't matter if fibreglass or plastic.

Thanks
  Reply
#2
mustangandy, The same shroud was used on A/C and non A/C cars. DOOZ-8146-D is the Ford part number for the shroud you need. DOOE-8146-D is an engineering number that was used for identification purposes by  the assembly line and parts and service at the dealer level to verify proper parts ordering.
This shroud was used on 70-71 429 Torino, 71 429 Mustang, and sister Mercury vehicles.
To find a affordable, undamaged NOS 429 shroud would be next to impossible. This is a Torino sourced part so it might be easier to find through some Torino vendors. Don't know who you've tried so my suggestions may be someone you've already called.
http://www.dearbornclassics.com/70-71-to...d-429.html
http://www.macsautoparts.com/ford_fairla...29-v8.html
http://dennis-carpenter.com/fan-shroud/p/D00Z-8146-D/
 The above are vendors I have used in the past for Torino parts and had good experiences.
Get you charge card out good luck on your shroud search!

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#3
(10-19-2018, 12:36 PM)secluff Wrote: mustangandy, The same shroud was used on A/C and non A/C cars. DOOZ-8146-D is the Ford part number for the shroud you need. DOOE-8146-D is an engineering number that was used for identification purposes by  the assembly line and parts and service at the dealer level to verify proper parts ordering.
This shroud was used on 70-71 429 Torino, 71 429 Mustang, and sister Mercury vehicles.
To find a affordable, undamaged NOS 429 shroud would be next to impossible. This is a Torino sourced part so it might be easier to find through some Torino vendors. Don't know who you've tried so my suggestions may be someone you've already called.
http://www.dearbornclassics.com/70-71-to...d-429.html
http://www.macsautoparts.com/ford_fairla...29-v8.html
http://dennis-carpenter.com/fan-shroud/p/D00Z-8146-D/
 The above are vendors I have used in the past for Torino parts and had good experiences.
Get you charge card out good luck on your shroud search!

That's fantastic, many thanks Steve. Need a few other bits so I'll see if I can do a job lot with one of them.
Cheers
Andy
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Pre-Heat Shroud? Helicopter 11 583 07-15-2018, 12:07 PM
Last Post: secluff
  FMX transmission shifter seal replacement how to mach1000 13 5,048 06-21-2018, 03:56 AM
Last Post: summerboy
  closing off sides of shroud delawarebill 14 789 06-17-2018, 06:36 AM
Last Post: delawarebill
  fan shroud Helicopter 43 2,652 06-03-2018, 11:09 AM
Last Post: Carolina_Mountain_Mustangs
Stang Water pump replacement Plywood50 8 528 05-23-2018, 10:27 PM
Last Post: EBSTANG
  A/C vent replacement rudyck 2 338 04-22-2018, 09:50 AM
Last Post: rudyck
  hood hinge replacement nailpounder 9 935 03-22-2018, 08:46 PM
Last Post: MustangChris
Wrench 351W/408 Oilpump replacement lldoor 3 536 01-25-2018, 11:44 AM
Last Post: rotorr22



Users browsing this thread: 1 Guest(s)