• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
429 C6 conversion
#1
I have a rebuilt 429 "N" code from a `70 Torino that I want to install into my 72 Cougar. I also have the C6 out of the same Torino, but it is a column shift trans. I really need some help to figure out what I`d need to change on the C6 to make it a floor shift for my Cougar. Is this at all possible? What do I need for the linkages? Are any of the linkages from the FMX usable? Are any of the linkages available? Do I have to keep the lockout that goes to the steering column? I'm sure most if not all of these questions have been asked a million times before but I could really use the help. Thanks very much for any information.

Mike
  Reply
#2
72survivor;129202 Wrote:I have a rebuilt 429 "N" code from a `70 Torino that I want to install into my 72 Cougar. I also have the C6 out of the same Torino, but it is a column shift trans. I really need some help to figure out what I`d need to change on the C6 to make it a floor shift for my Cougar. Is this at all possible? What do I need for the linkages? Are any of the linkages from the FMX usable? Are any of the linkages available? Do I have to keep the lockout that goes to the steering column? I'm sure most if not all of these questions have been asked a million times before but I could really use the help. Thanks very much for any information.

Mike

Here is some info on how I did it. http://www.460ford.com/forum/showthread.php?t=162057

You can use the FMX shifter but you need to fab a linkage.

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
#3
I thought this was a '71-'73 Mustang forum,
or am i missing something?

GregHuh

whistling LORD, MR FORD - JERRY REED
  Reply
#4
Well, They are our cousins! But, yes, it is for mustangs!

Here is a good site for Cougars.

http://www.westcoastclassiccougarinc.com/index.php

Thanks!

mustang7173
  Reply
#5
I wasn't looking to cause any problems, just trying to get useful info from people who have given this a shot. I've been on the Cougar sites for a while and not many have done this conversion. In the past, whenever I googled anything about 429 conversions I more often than not ended up being led back to this site. TommyK: thanks for the info, I'll check it out.
  Reply
#6
Austin Vert;129222 Wrote:I thought this was a '71-'73 Mustang forum,
or am i missing something?

GregHuh

Crownvic.net includes Grand Marquis and Lincoln Town Cars...

Our luxury cousins need some horsepower help too. Big Grin

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
#7
72survivor;129234 Wrote:I wasn't looking to cause any problems, just trying to get useful info from people who have given this a shot. I've been on the Cougar sites for a while and not many have done this conversion. In the past, whenever I googled anything about 429 conversions I more often than not ended up being led back to this site. TommyK: thanks for the info, I'll check it out.
No ProblemSmile!

As inferred, for the respective years, a LOT of the Cougar and Mustang parts are interchangeable.

I did this conversion (N Coded Torino with column C6) for my 1973 Grandé. As to parts, I simply told folks I was working on a 1971 C or J (429Cj?SCJ) Mustang. The link Tommy gave you is "right on" the money as to what you need to do.

Please don't hesitate to post up but any questions on your Cougar might receive "quicker" responses under the "Other Vehicles" Forum of this Site. You don't have to "own" a 1971 - 1973 Mustang to participate and we do have folks on the Site who are certainly willing to assist you with what you are doing with your CougarSmile.

BT

Do the RIGHT thing.
  Reply
#8
Austin Vert;129222 Wrote:I thought this was a '71-'73 Mustang forum,
or am i missing something?

GregHuh

It's pretty much the same car under the hood.
Why be so exclusive?

1971 Mach1
351C-4v
C6 is history-->>now TKO-500
  Reply
#9
cobra3073;129269 Wrote:
72survivor;129234 Wrote:I wasn't looking to cause any problems, just trying to get useful info from people who have given this a shot. I've been on the Cougar sites for a while and not many have done this conversion. In the past, whenever I googled anything about 429 conversions I more often than not ended up being led back to this site. TommyK: thanks for the info, I'll check it out.
No ProblemSmile!

As inferred, for the respective years, a LOT of the Cougar and Mustang parts are interchangeable.

I did this conversion (N Coded Torino with column C6) for my 1973 Grandé. As to parts, I simply told folks I was working on a 1971 C or J (429Cj?SCJ) Mustang. The link Tommy gave you is "right on" the money as to what you need to do.

Please don't hesitate to post up but any questions on your Cougar might receive "quicker" responses under the "Other Vehicles" Forum of this Site. You don't have to "own" a 1971 - 1973 Mustang to participate and we do have folks on the Site who are certainly willing to assist you with what you are doing with your CougarSmile.

BT


Sorry, I wasn't familiar with the Forum rules on this one.

Greg.Smile

whistling LORD, MR FORD - JERRY REED
  Reply
#10
check 
Absolutely!

mustang7173 welcome

cobra3073;129269 Wrote:
72survivor;129234 Wrote:I wasn't looking to cause any problems, just trying to get useful info from people who have given this a shot. I've been on the Cougar sites for a while and not many have done this conversion. In the past, whenever I googled anything about 429 conversions I more often than not ended up being led back to this site. TommyK: thanks for the info, I'll check it out.
No ProblemSmile!

As inferred, for the respective years, a LOT of the Cougar and Mustang parts are interchangeable.

I did this conversion (N Coded Torino with column C6) for my 1973 Grandé. As to parts, I simply told folks I was working on a 1971 C or J (429Cj?SCJ) Mustang. The link Tommy gave you is "right on" the money as to what you need to do.

Please don't hesitate to post up but any questions on your Cougar might receive "quicker" responses under the "Other Vehicles" Forum of this Site. You don't have to "own" a 1971 - 1973 Mustang to participate and we do have folks on the Site who are certainly willing to assist you with what you are doing with your CougarSmile.

BT

72survivor,

You might need to find a busted C6 from a Mustang and or locate the parts themselves. The "F " code is for Mustangs.

[Image: osgvv7.jpg]

[Image: 2mg582c.jpg]

[Image: 2qntag6.jpg]


Source: Ford Motor Master Catalog

This might help.

mustang7173 Big Grin


72survivor;129202 Wrote:I have a rebuilt 429 "N" code from a `70 Torino that I want to install into my 72 Cougar. I also have the C6 out of the same Torino, but it is a column shift trans. I really need some help to figure out what I`d need to change on the C6 to make it a floor shift for my Cougar. Is this at all possible? What do I need for the linkages? Are any of the linkages from the FMX usable? Are any of the linkages available? Do I have to keep the lockout that goes to the steering column? I'm sure most if not all of these questions have been asked a million times before but I could really use the help. Thanks very much for any information.

Mike
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Efi conversion Cainsable 6 508 09-15-2018, 10:56 AM
Last Post: fangstang
  429 motor and c6 trans Newold 3 261 09-09-2018, 06:23 AM
Last Post: Hemikiller
  429 valves and petrol grade mustangandy 5 253 09-07-2018, 03:25 AM
Last Post: mustangandy
  429 internals: Need some help... Fabrice 24 601 08-19-2018, 06:32 PM
Last Post: Don C
  429 valves springs spacer Fabrice 6 338 06-10-2018, 02:43 PM
Last Post: Fabrice
  429: What's this? How do I fix? Fabrice 2 315 04-14-2018, 05:49 PM
Last Post: Fabrice
  5-speed conversion questions scgamecock 7 863 01-11-2018, 08:46 PM
Last Post: Pastorpat
  351C accesories fit 429/460? scgamecock 3 764 09-26-2017, 04:58 PM
Last Post: 73pony



Users browsing this thread: 1 Guest(s)