• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
408c stroker cam advice
#11
Hi

Il try the spreadsheets, Thanks :-)

For knowing your limit you have to pass it thumb
  Reply
#12
(09-19-2019, 05:37 AM)Robsweden Wrote: Hi All and thanks for your answer.

I have not yet checked out the compression or which pistons to use. Probably Diamond or JE maybe. Heads are 62cc.

Regards Rob
I suggest contacting Randy Gilis at Race-Tech Pistons. They will make what ever you want at little to no extra cost. The owner used to own JE. Chuck
  Reply
#13
(09-20-2019, 08:09 AM)c9zx Wrote:
(09-19-2019, 05:37 AM)Robsweden Wrote: Hi All and thanks for your answer.

I have not yet checked out the compression or which pistons to use. Probably Diamond or JE maybe. Heads are 62cc.

Regards Rob
I suggest contacting Randy Gilis at Race-Tech Pistons. They will make what ever you want at little to no extra cost. The owner used to own JE. Chuck


I had a set of -10cc Racetec pistons made for my 64cc 4v heads.
My compression ended up at 10.3.
I used an Eagle forged 3.750 crank and Calles Compstar 6.125 rods...

[Image: 4c35f3f6d26752912a597ab6d0d4dcc7.jpg][Image: c87ca04d38d8e56cf8da26a52bf034ea.jpg][Image: 7bdecda681aade807dc33c1107fcc071.jpg]





Sent from my iPhone using Tapatalk
  Reply
#14
Hi

Great info from everybody, Il get back with some choices from me.

regards Rob

For knowing your limit you have to pass it thumb
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  roller cam lifter 164runner 4 144 10-12-2019, 10:32 AM
Last Post: 164runner
  Holley SA 670 tweaking. Need advice. Stanglover 33 903 09-27-2019, 06:34 PM
Last Post: Stanglover
  Swaping my 351 cleveland for 408w stroker EvilPuppetMaster 94 3,402 09-24-2019, 04:55 PM
Last Post: kusanagi
  Axle advice needed kusanagi 13 416 09-10-2019, 03:02 PM
Last Post: kusanagi
  383C stroker clearance TEXANOW 13 517 06-10-2019, 12:10 AM
Last Post: OzCoupe72
  302 2V new cam, which upgrades necessary 1971V8 10 486 05-14-2019, 02:29 PM
Last Post: Don C
  351c 2v Cam advice ianpala 33 2,069 05-08-2019, 08:05 PM
Last Post: c9zx
  A knucklehead needs carb advice jt.db 15 1,020 04-19-2019, 01:46 AM
Last Post: jt.db



Users browsing this thread: 1 Guest(s)