• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
351C Intake Manifolds
#1
Here is a of list of 351C intakes. This from the old 351 Cleveland website archives. Some of them have links to more information and pictures.

http://351cleveland.wikifoundry.com/page...ifold+351C

For those interested, the new 351C website has a similar listing, but some of the links don't work, and is at :
http://351c.net/board/index.php?/topic/3...fold-list/



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#2
It's missing this one:

[Image: Manifold1.jpg]

Ford experimental XE-151445. Uses three two barrel 2300 carbs. The outers are vacuum. The close spacing limited it to both vacuum secondaries and side bowls.

You can see in this pic just how tight they are. No room for metering blocks or center bowls...

[Image: DSC00942_zps1t6cs3cv.jpg]

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1971 351C 2V Intake and carb question. turtle5353 42 997 01-12-2019, 09:13 AM
Last Post: Ron Tanzi
  Exhaust manifolds and sound Aaron_1973 6 266 01-07-2019, 03:04 AM
Last Post: Aaron_1973
  Exhaust Manifolds bigfoot72 9 390 01-01-2019, 04:08 PM
Last Post: cougarnutct
  Tim meyer 351c thermostat and restrictor plate EvilPuppetMaster 11 422 12-30-2018, 08:27 AM
Last Post: EBSTANG
  Intake valley pan, reuse it??? scgamecock 11 461 12-20-2018, 05:42 PM
Last Post: barnett468
  351C Stumbling at low RPM TheDude 21 576 12-19-2018, 11:53 AM
Last Post: barnett468
  What to do to 351c 4v heads? scgamecock 45 1,666 11-19-2018, 09:27 PM
Last Post: jpaz
  Intake have to be on for a compression check? scgamecock 9 462 11-15-2018, 09:17 PM
Last Post: barnett468



Users browsing this thread: 1 Guest(s)