• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
351c flex plate
#1
Again people:

I need your help. My engine/transmission is being rebuilt. The flex plate/ring gear has a few teeth messed up. I need to replace it. The flex plate measures 14 1/4" accross. Haven't counted the number of teeth. There is no identification on the part. The engine is a 351C "Q"
code bored 20 over with c6 auto transmission. I been researching but have been unable to determine the correct flex plate to replace it with. This car will be a weekend cruiser. I apppreciate all the help I can get.

Thanks,
JImmy T.
  Reply
#2
The parts interchange book I have calls for a 164 tooth, part #C6TZ-6375-C, for manual transmission applications, and 164 tooth, part #D1ZZ-6375-C for an auto tranny.

I can tell you to be very careful when buying one, as I was bitten by bad data in a NAPA computer when I asked for a 351C flexplate and they gave me the wrong one for the wrong 351C motor variation (although it was the right year). Net result: over $1200 damage to my tranny because the flexplate killed the front pump. Nicely enough, NAPA covered the entire cost to fix it since their computer was wrong.

Your best bet would be to take the part # I gave you above and have it cross-referenced before you plunk down your $$$.
  Reply
#3
I think 72 and 73 351 CJ with C6 and small high stall converter had a different flex plate VS 71 C6
  Reply
#4
Pioneer PN FRA-220, specifically for CJ convertor bolt pattern. $106 plus shipping from Summit Racing. It is a long story but I have a new in the box FRA-220 flexplate I'd sell for $75.00 + shipping from 73064. Chuck
  Reply
#5
I believe i still have a stock flex plate on the shelf in the garage somewhere. If your interested let me know and i will see if i can find it.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#6
For what it in worth when you have your engine rebuilt , and the crank turned, I sent 2 new flex plates with the engine to be balanced with the crank. Also the balancer.I did this and was later glad I did.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351C M-Code engine Timing issue! Meyer 25 456 06-17-2018, 08:41 AM
Last Post: Stanglover
  Holley Sniper on a 351c Fabrice 44 4,469 05-31-2018, 01:03 PM
Last Post: Fabrice
  Trickflow heads on 351c with flat pistons Robsweden 25 2,278 05-23-2018, 12:17 PM
Last Post: barnett468
  Timing cover plate seal against oilpan missing Robsweden 4 271 05-08-2018, 01:14 AM
Last Post: Robsweden
  What's this under my 351C valve covers? Monterey 9 796 05-03-2018, 09:55 PM
Last Post: Studdley
  Headers for Circle Track Race Car w/ 351C 2v jdwest711 19 621 04-30-2018, 08:14 PM
Last Post: 427heaven
  351C Stroker / TKO 600 bellhousing question tony-muscle 11 1,001 03-29-2018, 03:18 PM
Last Post: tony-muscle
  351C 4V Carburetor ITMike5.0 35 2,884 03-13-2018, 07:28 AM
Last Post: rackerm



Users browsing this thread: 1 Guest(s)