• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
351C 2V Heads
#1
Hey guys. i was wondering if you guys could give me a realistic number I should ask for my 2v heads?? I have them and my intake posted up for sale on here and a few other places and just cant figure out what I should ask for the heads?? I have had a fair amount of interest in them but most people want them complete. So I talked to the machine shop today and had them order me all new 1 piece valves for these heads with the hopes they will sell easier. They went all through these heads and checked them and cleaned them up for me. They were completely rebuilt less than 3000 miles ago. New guides, hardened seats, 3 angle valve job, new springs, now new valves, they were decked, milled and tapped for screw in studs, and a good bit of port work has also been done. These heads work awesome but im just going bigger with this 408 im building. I know I will never get my money back out of them but I would like to get some out of them. What price would you guys ask?? I was thinking in the 500-600 dollar range?? I have way more into them than that with the port work, machine work and parts. Any help or opinions would be great. Let me know if i'm in the ballpark with my price?? Thanks Kevin

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351c cam lobe ID. Have to measure lift Ryunker 5 146 10 hours ago
Last Post: Ryunker
  351c vs 351w Tnfastbk 11 5,721 07-14-2018, 02:57 AM
Last Post: MissingNo.
  New camshaft time! 377 in Cleveland with CHI 2V heads. IT RUNS! Video on page 2 Bentworker 20 1,063 07-01-2018, 06:59 PM
Last Post: Heavy Metal
  Holley Sniper on a 351c Fabrice 45 5,009 07-01-2018, 01:54 PM
Last Post: Fabrice
  1971 351c m-code engine Meyer 8 363 06-23-2018, 06:14 PM
Last Post: keiths71
  351C M-Code engine Timing issue! Meyer 25 706 06-17-2018, 08:41 AM
Last Post: Stanglover
  Cracked 351 Cleveland Heads bigfoot72 29 1,095 05-26-2018, 12:37 AM
Last Post: barnett468
  Trickflow heads on 351c with flat pistons Robsweden 25 2,607 05-23-2018, 12:17 PM
Last Post: barnett468



Users browsing this thread: 1 Guest(s)