• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
351c 2v Cam advice
#31
The backfires indicate a lean condition. I would start with accelerator pump, although I would probably go through the entire carburetor, check all passages, jet sizes, etc. New does not mean correctly assembled/inspected. There might be debris in it from assembly or installation. The RPM range you're having problems with could indicate a problem in the transfer slots.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#32
The backfires were before I tuned the mixture screws and timed it, so I wouldn’t count that on the list of symptoms. And yeaaaa I've been thinking I oshould tear it down and put it back together to make sure, just been procrastinating since its my daily driver. Thanks
  Reply
#33
(05-08-2019, 03:45 PM)ianpala Wrote: The backfires were before I tuned the mixture screws and timed it, so I wouldn’t count that on the list of symptoms. And yeaaaa I've been thinking I oshould tear it down and put it back together to make sure, just been procrastinating since its my daily driver.  Thanks

That carb and basically all Holley style carbs made since the 90's have a backfire protection check valve so it is extremely unlikely the power valve diaphragm is ruptured.

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
#34
Most aftermarket carbs are shipped rich, it is safer than lean. Try dropping the primary jet size 2-4 numbers, readjust mixture screws and see if things improve. Chuck
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  351c fan don blanchard 9 256 08-20-2019, 09:52 AM
Last Post: don blanchard
  351C 4V "quirks" Mystic Fish 11 1,512 08-18-2019, 06:22 PM
Last Post: Spike Morelli
  Correct 351C Power Steering Hoses? street rod mach 1 12 867 08-18-2019, 03:25 PM
Last Post: Don C
  351C 4V Exhaust system kcmash 14 2,884 08-09-2019, 04:57 PM
Last Post: goodnigh
  Holley SA 670 tweaking. Need advice. Stanglover 15 442 07-19-2019, 08:44 AM
Last Post: Stanglover
  Power steering mounting 351c DeereFanatic 4 267 07-15-2019, 09:29 AM
Last Post: Carolina_Mountain_Mustangs
  73 Mach 1 351C w/AC vacuum line DeereFanatic 8 480 06-22-2019, 03:45 PM
Last Post: DeereFanatic
  Water Temp sender in water pump - 351C TheDude 34 1,251 06-11-2019, 08:06 PM
Last Post: TheDude



Users browsing this thread: 1 Guest(s)