• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3.50 Trac Loc
#1
I know of a 1st generation mustang axle w/ 3.50 Trac-Loc for sale locally.I beleive the axle is narrower,but will the guts swap into our housings?Love to get rid of the 2.75 standard axle.Thanks,
Eric

[Image: 1_11_01_14_4_00_47.jpeg]
460 , Edelbrock Performer carb. + intake , 204 / 214 cam , Pertronix Flamethrower 2 billet dizzy + coil , Crites long tubes , C6 .









  Reply
#2
Most 1st gens were 8", not 9" diffs.
I think (could be wrong) the only 9's were in HiPo cars.

Otherwise, yes, any 9" center will work as long as the axle spline count (28 or 31 were the OE choices) is the same as your axles.
May need to change U-joint at the rear, also (yoke may or may not be different). Not a big deal if needed.

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#3
They early units are known to split the cases.

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
#4
buy a new unit set up as needed and ready to go from someone like Speedway motors and be done with it. They had then for about 800 bucks and if you build from scratch that is hard to match

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  equa loc vs. trac loc boilermaster 3 932 03-29-2016, 09:20 AM
Last Post: red351
  Trac loc recommendation timachone 12 2,301 01-29-2014, 10:36 AM
Last Post: auron73mach1
  True Trac Luke 13 1,794 01-24-2014, 08:52 PM
Last Post: cazsper
  Trac Lok rear end oil Bill73Ragtop 3 831 10-25-2013, 05:06 PM
Last Post: mach1000
  Loc Tight on suspension bolts dmasini 3 553 10-22-2012, 11:04 AM
Last Post: dmasini
  9 inch Third Member Trac-Lok Pumpkin mustang7173 7 2,614 08-31-2012, 09:41 PM
Last Post: droptop73
  Currie Enterprises 9-Plus Trac Lock thundertc64 3 1,586 12-06-2011, 12:42 AM
Last Post: mach71351c



Users browsing this thread: 1 Guest(s)