• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2v Heads, Springs, and Intake for sale.NEW PICS!
#1
Hi guys. Decided to sell my 2v stuff. I am upgrading to AirFlow Dynamics Aluminum 4v heads for my 408 stroker build. So I have a fresh set of 2v heads for sale. New guides, valve seats, milled and drilled to accept screw in studs. Fair amount of port work done to them. I do not have the valves in these heads. If you want them with valves I can have the machine shop order some and install them for ya. I do have the valve springs that can go with it too. Heres the specs on the springs http://www.summitracing.com/parts/cca-924-16 I ran this cam with these spring, but they will work with other cams also. http://www.summitracing.com/parts/cca-cl.../make/ford The heads and springs are still over at the machine shop thats building my 408. The heads had less than 3000 miles on them. I can get some pics next week when i go to the machine shop. Not sure how much to ask for the heads, but if your interested please let me know. If you want them with valves or without, we can work out a price. Or if your just looking for some springs?? I also have an edelbrock performer intake for the 2v heads. It is pretty much brand new with only few thousand miles on it. No pics of it either, at machine shop. But heres a link to it. http://www.summitracing.com/parts/edl-27.../make/ford I would like to get $190 for the intake save ya $60 from new or make me an offer on all of it. Sorry for not having any pics guys! Just havent had the chance to make it to the machine shop to snap any. If anyone is interested in any or all of this stuff let me know!!
Thanks Kevin

PS I do have 1 pic of the heads and intake on my motor.

.png   heads.png (Size: 506.76 KB / Downloads: 121)

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#2
Dang, Turtle, where were you 500 miles ago? Huh

They look great, and I'm sure someone will get a good deal on them.

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#3
73vertproject;105751 Wrote:Dang, Turtle, where were you 500 miles ago? Huh

They look great, and I'm sure someone will get a good deal on them.

I was on the fence on whether i wanted to use these heads on my 408 or build it bigger. I decided if im gonna do it i might as well do it BIG.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#4
OK guys. had some interest in these heads. So i decided to have the machine shop order and install all new 1 piece valves. So these heads will be ready to bolt on and go. These are complete and are ready to run. Also will include the pushrods if you can use them. Depends on your setup, but they can be included as well. Let me know if your interested!

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#5
Ok, i picked up the heads from the machine shop today and they look awesome. They magnafluxed them, cleaned them all up, touched up anything that needed it and installed new valves. Heads are ready to go. Heres some pics that some guys asked for. Im just gonna post them here instead of pm'ing each person the pics. Had over 500 in just the valve job, seats and guides, more for the mods for the screw in studs, 200 for the valves, 250 for the intake, and couple hundred for the porting. I hope someone can use these! Be a shame for them to sit here. Let me know if your interested.

[Image: 2r3z7na.png]
[Image: icuuet.png]
[Image: 1570hty.png]
[Image: 28iuuf6.png]
[Image: 2r47i8g.png]
[Image: qx88p5.png]
[Image: ivafzk.png]
[Image: opvhus.png]
[Image: ekfe4m.png]

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#6
Got some paint on the heads last night.

[Image: 2501nye.jpg]
[Image: 25a89lk.jpg]
[Image: e8wm7b.jpg]

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#7
Finally got a pic of my intake to post up. Hope someone wants these heads and intake cause i want them off my workbench to make room for my AFD4v heads for my 408 build. I am asking $175 for the intake and $550 for the heads. If someone wants everything ,I will make them a deal and try to help out on shipping. These need a good home!!Big Grin And i need more cash for the 408 build, so throw out some offers!!

[Image: xnail0.png]
[Image: 2vl33vc.png]


Attached Files
.png   i.png (Size: 487.82 KB / Downloads: 77)

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#8
Looks like these are SOLD!!!! Sale pending!! Thanks TheJ!!!!!

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#9
Sweet! TheJ better post up video when he has those monsters mounted up and running! Cool beer

Steve



[Image: 25yvyp3.jpg]
  Reply
#10
You know I will...

Jayson
[Image: 36319488731_8f2a376549_z.jpg]
73 Mach 1 Mustang
89 Dodge Shadow ES
94 Jeep Wrangler

  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Headliner bows pics for AdaMzWD 3514boltstang 0 73 07-10-2018, 02:51 PM
Last Post: 3514boltstang
  ONE OF MY PROJECTS FOR SALE! kevken1959 3 283 07-09-2018, 04:17 PM
Last Post: chris.sima
  [FOR SALE] deluxe Wood grain door inserts, performer intake, tach cluster. 4 speed setup. Pic 87fox72mach 9 647 07-08-2018, 02:01 PM
Last Post: 87fox72mach
  1-pair BARE Closed chamber 351 2V Aussie Heads 351VENOM 8 1,234 07-01-2018, 01:35 PM
Last Post: Antmcontest
  1971 D1AE GA Ford 351 Cleveland 4v heads 428kid 4 437 06-17-2018, 04:06 PM
Last Post: 428kid
  '71 Vert For Sale wrshog 2 213 06-12-2018, 10:44 AM
Last Post: mach71351c
  1971 mustang coupe for sale 71coupe 3 406 06-05-2018, 11:18 AM
Last Post: 71coupe
  D0OE 9425 D intake Ford 429 CJ 9J24 date 428kid 0 154 05-29-2018, 08:13 PM
Last Post: 428kid



Users browsing this thread: 1 Guest(s)