• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2 spoke steering wheel
#1
trying put together the 2 spoke steering wheel, is there a write up on how to put it together and how to install in the car
[Image: untitled.png]

best image hosting site free
  Reply
#2
Ford technical drawings show the exploded view which breaks down individual pieces. including part numbers.
Someone on here has their parts books handy and can post one up. (THANKS).

Also google installing 1971 Mustang steering wheel. There are a few videos available.

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#3
I try google all they have is the grant steering wheel
  Reply
#4
What exactly are you trying to put together? It's been awhile since I had mine off and apart, but don't remember there being that many pieces. A couple screws from the back held the rim blow pad on, and then the nut in the center held the wheel to the column. I also remember a couple wires with fast-ons for the horn and that if you shirt them it blows out the fuse which takes out more than the horn, but I forget what else. After that I learned to take the fuse out before removing the wheel.

73 ragtop, 1999 Mustang Bright Atlantic Blue Paint, Phoenix Engine 302-335HP,  Edelbrock Carb & Performer manifold; c4 with 2000 stall and shiftkit; 3:55 auburn limited slip differential, Hedman shorties; Car Chemistry Exhaust

Classic Air; Tilt Steering Wheel; 1999 Chrysler Sebring bucket Seats ; power windows;
  Reply
#5
(12-27-2017, 09:47 PM)mudbilly Wrote: What exactly are you trying to put together? It's been awhile since I had mine off and apart, but don't remember there being that many pieces.  A couple screws from the back held the rim blow pad on, and then the nut in the center held the wheel to  the column. I also remember a couple wires with fast-ons for the horn and that if you shirt them it blows out the fuse which takes out more than the horn, but I forget what else.  After that I learned to take the fuse out before removing the wheel.

To prevent the horn shorting while removing the wheel, simply disconnect the battery.

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
#6
Thanks, how about the emblem do it screws from the bottom or snap in
  Reply
#7
The emblem snaps in. Don't take it out unless you plan to change it! it comes out as one piece when you remove the center spoke. you only have to unscrew to screws on the back, unplug the horn wires and thats it!

If you plan on taking out the whole steering wheel from the column you will need a steering wheel puller. before removing mark its position between the steering wheel and the column spline so it will be align when you put it back together.

Sent from my SM-G935F using Tapatalk
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Brake Pedal Support & Steering Column Brackets AOCUSNRET 5 168 10-02-2019, 08:57 PM
Last Post: Kilgon
  Leather wrapped steering wheel DeereFanatic 6 329 09-11-2019, 06:14 PM
Last Post: DeereFanatic
  How Do I Treat Rust Inside Wheel Wells? icejawa 11 607 03-25-2019, 01:52 AM
Last Post: rackerm
Wrench Wheel arch trim question Ballaratcastle 6 322 03-17-2019, 08:08 PM
Last Post: Ballaratcastle
  Wheel show everyone, show what you got!!! 91iroc 90 21,294 02-21-2019, 09:05 PM
Last Post: keiths71
  Steering wheel change mustangandy 24 1,337 10-26-2018, 08:19 AM
Last Post: Hemikiller
runninpony Grant GT Steering Wheel NOT A T5 7 766 08-20-2018, 08:08 PM
Last Post: NOT A T5
runninpony Steering Column NOT A T5 6 777 06-19-2018, 11:20 AM
Last Post: Don C



Users browsing this thread: 1 Guest(s)