• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1973 Mach 1 Ram Air Parts
#1
Stang 
Has anyone had any experience with aftermarket Ram Air parts for the 71-73 Mustangs? I have had a nice original Ram Air air cleaner assembly from a 351 2V 73 Mach 1 for over 25 years now but I have never purchased the plenum or the flapper doors (mostly due to the high price for those items). How about the aftermarket plenum/flapper set up? The price is right but I'm not interested if it is of poor quality or doesn't work. I would like to put that Ram Air air cleaner to work on my Mach 1. Thanks for your help.
  Reply
#2
This is a good question I would like to know also.If installing the ramair Aftermarkets parts what other parts will you have to scrounge up to make it work?

[Image: 20r9ylt.jpg]
  Reply
#3
Talk to Don (cousin BS) at Ohio Mustang Supply, he will shoot you straight on the quality.
  Reply
#4
Tnfastbk;18154 Wrote:Talk to Don (cousin BS) at Ohio Mustang Supply, he will shoot you straight on the quality.

I installed the complete Ram Air setup that I bought from Ohio Mustang Supply 2-3 years ago. It fit fine and the flappers still work well. Just be careful when attaching the vacuum hoses to the flapper's vacuum actuators, don't use too much force. The nipple is just pressed into the vacuum canister. Mine came off once but I pushed it back in with no further problems.
  Reply
#5
I got mine from Laurel Mountain Mustang, best price + shipping that I could find. I think most of these are made by "Dyna-Cor" . Mine installed well, the only thing I had to do was do a little filing where the flapper closed, it was rubbing and sticking closed from a raised mold line on the unit. I checked the operation out with a vacuum pump before installation. Here is a link from a Mustang Monthly article on adding the unit to your car...

http://www.mustangmonthly.com/techarticl...index.html
  Reply
#6
Nance;18124 Wrote:This is a good question I would like to know also.If installing the ramair Aftermarkets parts what other parts will you have to scrounge up to make it work?

Nance, you just need this
Don
Item #3641QXYKIT
71-3 RAM AIR SYSTEM KIT
Ram air system includes metal base complete with snorkel, vacuum assembly and lid, hood plenum with functional vacuum flapper assemblies, seal, vacuum lines, tee, screws, clips, filter, breather element and wing nut. Kit for 351C. Excellent reproduction. Price: $539.95

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#7
Will the ram air work with aftermarket carbs and intakes?
I am wanting to upgrade my carb and intake and would like to have the ram air but not sure it will work.
  Reply
#8
Matt Peetz;18223 Wrote:Will the ram air work with aftermarket carbs and intakes?
I am wanting to upgrade my carb and intake and would like to have the ram air but not sure it will work.

May have to do some modifing to make it work due to the hight of the intake and carb.
  Reply
#9
Be careful with aftermarket distributors and intakes and carbs. I could never find a distributor that would fit with the factory ramair air cleaner. I do have an aftermarket low rise intake and Edelbrock carb that fit fine.


Tnfastbk;18232 Wrote:
Matt Peetz;18223 Wrote:Will the ram air work with aftermarket carbs and intakes?
I am wanting to upgrade my carb and intake and would like to have the ram air but not sure it will work.

May have to do some modifing to make it work due to the hight of the intake and carb.

   
  Reply
#10
Talked with Don and had him put it on my order already that should ship thursday to save on shipping.
Am sure i can get it to work. I might have to run an open air filter but will see.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  408 Stroker parts discussion tony-muscle 25 1,451 10 minutes ago
Last Post: 73pony
  Power Steering Pump Replace 1972 MACH, stock? andy72 9 247 05-17-2018, 12:05 PM
Last Post: Fabrice
  1973 351C 4V Exhaust Manifold Photos Needed Wolverine 2 422 02-26-2018, 08:45 AM
Last Post: OMS
  Parts list for my 351C 1983 Rebuild mrmolding 17 598 01-21-2018, 08:31 PM
Last Post: mrmolding
  Camshaft and Intake manifolds for 351C 4V 1973 g-strandet 1 360 12-13-2017, 05:51 PM
Last Post: Canted 393
  72 mach 1 rear sway bar links EvilPuppetMaster 2 329 12-09-2017, 06:22 PM
Last Post: EvilPuppetMaster
  Ram Air friendly distributer cigarguy 6 550 11-15-2017, 11:18 AM
Last Post: Stanglover
  Non flapper ram air question cigarguy 8 642 11-14-2017, 11:17 PM
Last Post: cigarguy



Users browsing this thread: 1 Guest(s)