• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1973 mach 1 351 cleveland rear brakes
#1
Hello All 

Can anyone tell me what size rear drum brake and shoe size a 1973 mach 1 351 cleveland would have come with.

drum size 

shoe width 

here is picture of my brakes now
[Image: 20190728-102117.jpg][Image: 20190728-101120.jpg]

just trying to work out if has right size shoes in .

Thanks Nige
  Reply
#2
The drum should be 10" diameter and the shoes 2.5" wide.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
(07-29-2019, 02:05 PM)Don C Wrote: The drum should be 10" diameter and the shoes 2.5" wide.
Thanks for that about to replace the cylinders and shoes but only has 2" shoes in at present ? last owner
  Reply
#4
The drums look like they may be for 2" shoes. Youl need to make sure the drums are wide enough, and also not worn beyond the wear limit, which should be on the brake drum.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#5
(07-29-2019, 02:17 PM)Don C Wrote: The drums look like they may be for 2" shoes. Youl need to make sure the drums are wide enough, and also not worn beyond the wear limit, which should be on the brake drum.
ok thanks for the info
  Reply
#6
I thought they were 2" wide from factory on 10" drums?

http://www.mustangandfords.com/parts/mum...mprovement

"1971-73 351/429 Primary Shoe Secondary Disc Brake 2.00 x 8.43-inches 2.00 x 10.82-inches"

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#7
(07-29-2019, 02:23 PM)73pony Wrote: I thought they were 2" wide from factory on 10" drums?

http://www.mustangandfords.com/parts/mum...mprovement

"1971-73 351/429 Primary Shoe Secondary Disc Brake 2.00 x 8.43-inches 2.00 x 10.82-inches"
Thanks for that article good reading  thumb
  Reply
#8
Here are a couple pics I did not measure. The Mach 1 is Q code and Comp. Susp. and the vert is H code regular 9". I have seen drums without the fins could have been replacements.
Mine were painted on the original car maybe because of the slotted aluminum wheels. I use charcoal grill paint on them high heat resistance. Notice the missing balance weight on the drum. Car never gets driven so I did not worry about it.
The last pic with the broken lug stud is the 73 vert. 
[Image: DSC-0992.jpg]

[Image: DSC-0993.jpg]

[Image: DSC-0943.jpg]

[Image: DSC-0945.jpg]

[Image: CAM-0094.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#9
10X2 for the rear of a '73 w/351


  Reply
#10
OK, I was going by my '71 shop manual, should have known better.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
runninpony Very little rood feel on my 72 mach 1 Denise1972 5 218 10-16-2019, 10:05 PM
Last Post: Bentworker
  Rear factory sway bar addition? cwalker509 3 137 10-09-2019, 03:39 PM
Last Post: Mister 4x4
  What colour factory sway bar 71-72 Mach 1s baz70 7 467 10-02-2019, 04:04 PM
Last Post: Rmach1
  Squeaky Leaf Springs/rear suspension andy72 4 179 09-22-2019, 12:08 PM
Last Post: Don C
  Not your normal wheel/tire/brakes fitment thread. DeathWobble 12 511 08-27-2019, 01:24 PM
Last Post: DeathWobble
  Rear sway bar Instructions Robsweden 11 723 08-12-2019, 08:25 AM
Last Post: Robsweden
  Rear Suspension Torque Specs 73pony 8 465 07-26-2019, 12:45 PM
Last Post: Carolina_Mountain_Mustangs
  Rear brakes hanging up. turtle5353 2 227 07-13-2019, 04:45 PM
Last Post: turtle5353



Users browsing this thread: 1 Guest(s)