• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1972 vs. 1973 351C Vacuum System
#1
As I look at the diagrams for the vacuum system on a 1972 351C, I am not seeing anything that matches my set up.

You all are going to get sick of these questions. But let me start back of the engine.

There is a solenoid located on the back of the manifold that I think is some diagrams is shown on the opposite side and in the front.



[Image: Vac-21-L_zps2rgxlj0p.jpg]

Here's a better shot.

[Image: Vac-23-L_zpscwrovtl4.jpg]

As you can see it has no power connected nor hoses. Is that the Solenoid Dist vaccum?

How's it routed? Back up front to the Valve Ass. Distributor vaccum control?

I've got a few more questions I'll post up.

Thanks
Tim

Thanks

Tim
Tucson, Az
1973 SportsRoof
351C bored .040
Crank .020  and Stock cam
Flattop pistons
Edelbrock 4bbl CARB 800 CFM ELEC CHOKE
Edelbrock Performer 2750 Intake Manifold

[Image: NewPrimedHood_zpsw2jaj0cu.jpg]
  Reply
#2
Maybe because this is a A/C car the Solenoid Dist vacuum was relocated to the back.
[Image: Vac-23-L_zpscwrovtl4.jpg]

That might explain it.

Tim

Thanks

Tim
Tucson, Az
1973 SportsRoof
351C bored .040
Crank .020  and Stock cam
Flattop pistons
Edelbrock 4bbl CARB 800 CFM ELEC CHOKE
Edelbrock Performer 2750 Intake Manifold

[Image: NewPrimedHood_zpsw2jaj0cu.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351c 2v Cam advice ianpala 15 403 03-11-2019, 10:04 AM
Last Post: mustang7173
  Valve cover suggestions for 351C 73' mach 1 18 528 03-07-2019, 01:18 PM
Last Post: rackerm
  PCV Hose 351C turtle5353 14 357 02-28-2019, 11:19 PM
Last Post: Stanglover
  351c starting & driving issues n_reckless 12 409 02-28-2019, 10:42 PM
Last Post: kcmash
  Is my 351C Distributor 180 out? andy72 14 369 02-28-2019, 11:09 AM
Last Post: Danoh1
  Initial Timing 351C turtle5353 10 308 02-28-2019, 10:08 AM
Last Post: Don C
  351C 4V / C6 auto trans removal advice needed baz70 33 796 02-25-2019, 09:27 AM
Last Post: Bill73Ragtop
  351C 4V - 72 Mach 1 Engine fan baz70 16 472 02-21-2019, 09:13 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)