• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1972 covertible panel prints
#1
Hello everyone. I am fixing my 72 convertible. I found a lot of rust on it so I am cutting out the rust and welding in new metal. I can figure out what most of the pieces should look like but one area I do not. I found the support beam inside the outer and inner rocker panels is gone on the left side, also some of the floor. Does anyone know where I can get information on what it should look like and what gauge metal it is? any info would be great!! I have before and after photos of every thing I have done so far.
  Reply
#2
docweld;16101 Wrote:Hello everyone. I am fixing my 72 convertible. I found a lot of rust on it so I am cutting out the rust and welding in new metal. I can figure out what most of the pieces should look like but one area I do not. I found the support beam inside the outer and inner rocker panels is gone on the left side, also some of the floor. Does anyone know where I can get information on what it should look like and what gauge metal it is? any info would be great!! I have before and after photos of every thing I have done so far.

If you post some pics I'm sure somebody will be along to help you out. there is quiet a few convertibles on here. In the mean time jump over to the introductions forum on here and introduce yourself so you can get a proper welcome.
  Reply
#3
Agree with Roy here... that info you can find it here if you show everyone pictures and the especific problem you´re finding... Not only a lot of vert members here but a lot of guys are professionals on bodywork so.. you are in good hands my friend!



Damián Cool

[Image: 120x45bk1ani.gif]
Vote For 7173Mustangs.Com Every Day!
  Reply
#4
URUGUAYAN_FASTBACK;16112 Wrote:Agree with Roy here... that info you can find it here if you show everyone pictures and the especific problem you´re finding... Not only a lot of vert members here but a lot of guys are professionals on bodywork so.. you are in good hands my friend!

Thanks,
I did do the intro post. I will take some pics and add them to this post


Attached Files Thumbnail(s)
               
  Reply
#5
Here are some pics I took about three years ago of the inside of my 73 Convertible. The floor was sound, I just did some touch up in spots. I don't have any pics of the undercarriage. Hope this helps some.

[Image: 2005_0430050.jpg]

[Image: 2005_0430047.jpg]

[Image: 2005_0430048.jpg]

[Image: 2005_0430054.jpg]

[Image: 2005_0430053.jpg]

[Image: 2005_0430062.jpg]



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




  Reply
#6
OLE PONY;16171 Wrote:Here are some pics I took about three years ago of the inside of my 73 Convertible. The floor was sound, I just did some touch up in spots. I don't have any pics of the undercarriage. Hope this helps some.

[Image: 2005_0430050.jpg]

[Image: 2005_0430047.jpg]

[Image: 2005_0430048.jpg]

[Image: 2005_0430054.jpg]

[Image: 2005_0430053.jpg]

[Image: 2005_0430062.jpg]

Thanks, looks like you did a nice job!! But I need to know what is inside the rocker and floor
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1972 351 ram air andy72 31 4,825 12-02-2018, 02:52 PM
Last Post: c9zx
Wrench Sail panel parts n_reckless 4 198 12-01-2018, 04:31 PM
Last Post: n_reckless
runninpony Package Tray Metal Trim Panel Question cheezeba11 4 244 11-17-2018, 04:39 PM
Last Post: brushwolf
  1972 Mustang functional Ram Air Boss1Ray 13 2,613 09-24-2018, 08:49 AM
Last Post: Boss1Ray
  1972 antenna type c9zx 11 742 05-03-2018, 07:07 AM
Last Post: red351
  Dealer Pics From 1972 ITMike5.0 11 1,690 04-25-2018, 11:45 AM
Last Post: ITMike5.0
  Need advice 1972 Q-code/4 speed project Pheadrus 6 854 03-30-2018, 07:11 PM
Last Post: Harry365
  1972 Mach 1 Grille Support Capn_Morgan 25 2,088 03-28-2018, 11:02 PM
Last Post: NG8264723



Users browsing this thread: 1 Guest(s)