• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1971 convertible for sale.
#1
$18,000


[Image: 359d99e82a0d74fabc6554517d4b24e4.jpg][Image: 08c5cd70554b1bf601ce590d48bff4b8.jpg][Image: 69255ba1aa27cd7d3f830a1cde9865eb.jpg]

In it’s a 1971 Mustang that was originally a 6 cly 3 speed manual car white with black interior and top. So it is not matching numbers but engine in the car was from a 1971 mustang.  My plan was to build a Mach one convertible tribute car.  The original engine was not with the car when I purchased it.  It had a rebuilt 6 cly. 

It has had the following work. 
Engine
A 1971 Mustang 351 2v head cleveland engine was built with flat top pistons 40 thousands over.  New bearings, camshaft, Pistons, valve springs, double roller timing, chain, camshaft is designed for torque. Edelbrock 4 bbl intake, holley carburetor, hooker headers, 2 ½ exhaust, chrome tips.  Runs great!  Estimated HP 330 with over 400 foot pounds torque
PerTronix Ignitor III Solid-State Ignition, and coil
New radiator, new alternator,
Rebuilt power steering pump. 
New water pump
New starter
New stainless steel brake lines, New brake hoses, new power brake booster, new rotors, new master, new pads, new  calpers,  new rear brakes, shoes, wheel cly, hose, new stainless steel E brake cables . So the brakes are all new.
Transmission is a used worldclass 5 speed from a late model cobra. 
New flywheel, pressure plate and clutch throw out bearing. McLeod
New driveshaft
A 9 inch mustang rears was purchased and rebuilt,  factory posi new clutches. 3.71 ford gears, all new bearings.
Has new rear grab a track 5 leaf springs.
Front springs are heavy duty springs and roller perches. 
So drivetrain and brakes are done!

The car had rust, following items replaced
Floors, rear tail light area, under cowl a patch panel was placed, new quarters, battery tray, and some of the wheel wells. Also subframe connector was welded in. 

Car was epoxy primered and blocked.  Painted 1971 poly blue with ardent silver. 
New weather striping.
New grill for Mach one.  And sport lights
New tires.  16 inch cragar s/s in front and 17 inch cragar SS in rear.  I have the factory 14 rims and hubcaps. 
New front and rear bumper.


What the car needs. 
Interior is original.  So it is tired. 
Dash needs final assembly.  Was updating it with a/c.  Has factory a/c under dash.  I also have Mach one gauges.  But not the wiring harness.

Top is tired.  It had some rips.  They have been glued.  Rear window was reglued.it was patched so that if I was caught in the rain it would be ok.  I have all new weather striping for top but not installed,  frame for top could use paint. 
Top does have new hydraulic hoses.  And it works.

The suspension could use new shocks, and rubber parts in front. 
Windows need adjusting.

For the a/c it needs most of the under hood parts, such as brackets, compressor, and condenser, and hoses.

I have driven the car and it goes and stops well.  The shifter is the original one from the late model mustang.  They make a hurst shifter that would be nice. It’s a little longer by a few inches. 

For the bad news.  The other day.  The rear driver wheel came off and did some damage to driver quarter.  I think most of it will come out without repainting quarter.  I should have re torqued the mags.  Dumb thing to do.  I was going slow. Like 10 or 15 when it happed.  Car just sat down on the wheel. 






 










Sent from my iPad using Tapatalk
  Reply
#2
Price? any pics of the damage to rear quarter? Interior and underhood pics?

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#3
(08-06-2019, 07:36 AM)73pony Wrote: Price? any pics of the damage to rear quarter? Interior and underhood pics?

I see the price of $18,000 in between the pictures. I edited to make price more noticeable.



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




[+] 1 user Likes OLE PONY's post
  Reply
#4
[Image: 80253edf0ae79822820baaa5049beb73.jpg]


Sent from my iPad using Tapatalk
That’s the quarter panel.
  Reply
#5
[Image: 19e77cd64800d1f49166d53a4ee68b55.jpg]

Old photo. Will take newer one.


Sent from my iPad using Tapatalk
  Reply
#6
[Image: 40841fb99730a1ebee3df6dbfcaf56c6.jpg]


Underside.
  Reply
#7
[Image: 583b72a7f895e31b98ad423223a9f52b.jpg]

Underside


Sent from my iPad using Tapatalk
  Reply
#8
[Image: 14dd0ee08a7849508fc2da3ccda4856e.jpg]

Head and the porting.
  Reply
#9
[Image: 592f0f5352f3daa228309dbdf500c582.jpg]

9 inch rear end going in.


Sent from my iPad using Tapatalk
  Reply
#10
Today[Image: b9bf8ae0cc93bf263712c2300e99c1f4.jpg][Image: 9e96f80be51876aba4e4930f2cd5e03b.jpg][Image: 1e26ebbaf532325348f34171ab8a8e8c.jpg]


Sent from my iPad using Tapatalk
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1972 Q-Code Cougar for sale Partsman73 2 365 08-21-2019, 05:13 PM
Last Post: Partsman73
  73 Mustang Convertible w/ 351C + AOD. ($13999) fvc496 2 297 06-28-2019, 08:33 AM
Last Post: fvc496
  1972 Convertible Q Code - well optioned *** SOLD *** rpxr400 0 467 05-24-2018, 02:22 PM
Last Post: rpxr400
  72 Mustang for sale Nance 3 1,014 02-06-2018, 11:00 AM
Last Post: Nance
  Boss 351 For Sale 1hotboss 2 1,607 05-15-2017, 02:53 PM
Last Post: shelbygt500



Users browsing this thread: 1 Guest(s)