• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
351C water pump bolt puzzle
#1
Hi guys,
unfortunately I did not note the location of the different sized water pump bolts when I removed them from the 1971 351C and stored them in a bag. Does anyone have a scheme or drawing with the bolt sizes and which bolt goes where?

Thanks.

Michael
  Reply
#2
Spechti;63964 Wrote:Hi guys,
unfortunately I did not note the location of the different sized water pump bolts when I removed them from the 1971 351C and stored them in a bag. Does anyone have a scheme or drawing with the bolt sizes and which bolt goes where?

Thanks.

Michael

I would just use trail and error. Not to many possiblities. If you put a long bolt where a short one goes it will not seat or thread all the way in and with a short bolt misplaced prob will not even start.

You can also just put them in the holes with the pump off the car and get a good ideal where they go.


  Reply
#3
Here is another gripe with a vendor...the infallible ARP.

You would think THEY would detail what bolt goes where on their bolt kits. WOULD IT KILL THEM???

[Image: 11jmcuc.png]
351C Bold Manners, Brash Attitude
Favorite Teams: Michigan Wolverines and Whoever Is Playing Ohio State.

When I drive past a herd of cows, the cows MOO at me
  Reply
#4
I did a water pump today. Here ya go:

[Image: IMG_16741.jpg]

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
Wrench Help! Not sure how to mount the power steering pump 351W Ballaratcastle 12 306 08-15-2018, 09:17 AM
Last Post: Hemikiller
  1973 351C vacuum lines and eventual other questions scottyrocks 14 290 08-12-2018, 11:53 AM
Last Post: Don C
  Correct 351C Power Steering Hoses? street rod mach 1 7 208 08-12-2018, 08:26 AM
Last Post: NOT A T5
  Water Pump mounting bolts EBSTANG 2 195 07-23-2018, 08:33 PM
Last Post: turtle5353
  351c cam lobe ID. Have to measure lift Ryunker 8 294 07-23-2018, 06:04 PM
Last Post: Ryunker
  351c vs 351w Tnfastbk 11 5,907 07-14-2018, 02:57 AM
Last Post: MissingNo.
  Holley Sniper on a 351c Fabrice 45 5,463 07-01-2018, 01:54 PM
Last Post: Fabrice
  1971 351c m-code engine Meyer 8 496 06-23-2018, 06:14 PM
Last Post: keiths71



Users browsing this thread: 1 Guest(s)