• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1971 Mach 1 M code 4 speed
#1
1971 Mustang Mach 1 M code 4 speed sold as a roller. Body is straight has a few rust bubbles in the paint one about the size of a quarter the other the size of a dime.Batterey tray and apron have some rust out due to batterey problem sometime in its life.Was factory Dark Blue Metalic on Blue, now Red on Black. Missing engine, trans, and front seats. Has factory 9 inch with I think 3.50 gears dual exhaust with h pipe heavy duty shocks, springs, and sway bars both front and back. This one resides in very warm dry Arizona sunshine! Trying to figure out how to post pictures. Available at additional cost is a few different engine packages- a complete 429 scj, a complete low mile factory hot rod cleveland with paperwork and about 450 hp or a FE set up for those that like that stuff. 7000.00 Thanks for the consideration.
  Reply
#2
Welcome to the site, if you have pictures you should post them or link to them as it would help your car sell faster
To post pictures click the "insert image" link in the control panel above the posting box you write in

after pressing insert image button cut and paste the url location of your pictures into the space of the box that appears then press OK and you are done
  Reply
#3
welcome from Kansas

1965 D Code
[Image: 64-dcode-200x83.jpg]
  Reply
#4
Detector;57953 Wrote:welcome from Kansas

Thanks for the welcome from sunny AZ.
  Reply
#5
Hey, 427, welcome to the club! Glad to have you here. Just messin' with ya about your pistons on the other thread. I'm in the final stages of rebuilding my 351C and could have used them last summer. Dodgy

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#6
73vertproject;57984 Wrote:Hey, 427, welcome to the club! Glad to have you here. Just messin' with ya about your pistons on the other thread. I'm in the final stages of rebuilding my 351C and could have used them last summer. Dodgy

Doc

Doc - Hello back at ya thanks for the warm welcome.I come on here and within the first day I have talked with some really good folks. This group seems like the most sincere group of mustang enthusiasts I have been around in my 35 years in the hobby. I am involved in most of the mustang groups and this one just feels right, like my old comfy worn house shoes in a good way!Tongue
  Reply
#7
welcome to the forum board from Ontario Canada

[Image: 1_14_01_12_10_54_29.png]

Ken

73 Convertible 302-4v-3spd yellow /white int

08 Bullitt 4.6-5 spd black/black int


All I ask is a chance to prove that money can't make me happy
  Reply
#8
whitesoc;58008 Wrote:welcome to the forum board from Ontario Canada
Greetings to the great white north- Heres sending some warm weather your way from sunny Arizona!Wink


Machman;57931 Wrote:Welcome to the site, if you have pictures you should post them or link to them as it would help your car sell faster
To post pictures click the "insert image" link in the control panel above the posting box you write in

after pressing insert image button cut and paste the url location of your pictures into the space of the box that appears then press OK and you are done
Machman- I dont have an URL any other suggestions for posting pictures for an old dude that is frustrated at all things computer!Angry

  Reply
#9
Dude...how can you call it a 4 speed when it got no trans?

[Image: 11jmcuc.png]
351C Bold Manners, Brash Attitude
Favorite Teams: Michigan Wolverines and Whoever Is Playing Ohio State.

When I drive past a herd of cows, the cows MOO at me
  Reply
#10

Machman;57931 Wrote:Welcome to the site, if you have pictures you should post them or link to them as it would help your car sell faster
To post pictures click the "insert image" link in the control panel above the posting box you write in

after pressing insert image button cut and paste the url location of your pictures into the space of the box that appears then press OK and you are done
Machman- I dont have an URL any other suggestions for posting pictures for an old dude that is frustrated at all things computer!Angry




[/quote]

If you have images of the car on your computer you can upload them to many of the free pic hosting sites on the web (such as photo bucket) then link to them using the above proceedure
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1972 HO Mach 1 for sale snakebite8 0 33 2 hours ago
Last Post: snakebite8
  GRABBER LIME,M-CODE,4 SPD,RAM AIR,FOLDDOWN, MACH IMACH I,RUNNING PROJECT kevken1959 0 98 08-14-2018, 09:42 PM
Last Post: kevken1959
  1972 Q-code cobra jet motor complete 3514boltstang 5 464 08-14-2018, 11:45 AM
Last Post: Don C
  [FOR SALE] deluxe Wood grain door inserts, performer intake, tach cluster. 4 speed setup. Pic 87fox72mach 11 933 08-14-2018, 11:04 AM
Last Post: 87fox72mach
  1971-1973 MUSTANG SHEET METAL 302429c 2 206 08-10-2018, 09:41 PM
Last Post: 302429c
  73 Mach 1 Parts Assortment - MUST GO street rod mach 1 0 121 08-10-2018, 05:16 PM
Last Post: street rod mach 1
  1971 mustang coupe for sale 71coupe 4 528 08-09-2018, 01:43 PM
Last Post: 71coupe
  GRABBER LIME,M-CODE,4 SPD,RAM AIR,FOLDDOWN,MACH I,RUNNING PROJECT kevken1959 7 329 07-22-2018, 11:38 PM
Last Post: mach71351c



Users browsing this thread: 1 Guest(s)