• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Power windows for sale
#1
Saw this on e-bay and thought someone might be interested:

http://www.ebay.com/itm/Ford-Cougar-Must...657wt_1185

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#2
Here's the whole shebang

http://www.ebay.com/itm/Mustang-1971-73-...es&vxp=mtr

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
#3
for GAWD sake!!!!!!!!!!!!!!!!!!!!!!!!! I've been looking every where ... that's EXACTLY what I neeeeeeddddd and MORE!!!! Geezus. I look on ebay 2 times a week up till the past month. FIGURES!


67 Diamond Blue Vert

[Image: images?q=tbn:ANd9GcRveIaRU6OAzTfd2Mv6ypG...mJJrHJ_B_Q]

DUDE

LOL even my sig line offended somebody!
  Reply
#4
The power window motors on my caddie are about half that size.

TommyK;61218 Wrote:Here's the whole shebang

http://www.ebay.com/itm/Mustang-1971-73-...es&vxp=mtr
$600???? I think if I want my windows rolled down with little effort on my part, I would save pocket change by getting off the freeway, pay the guy at the end of the freeway ramp $2 to roll down my windows for me and then stop at the 7-11 by my home and pay the bag lady $2 to roll them back up....

I could do that 150 times!!!! That is, if I ever rolled my windows up in the first place.

[Image: 11jmcuc.png]
351C Bold Manners, Brash Attitude
Favorite Teams: Michigan Wolverines and Whoever Is Playing Ohio State.

When I drive past a herd of cows, the cows MOO at me
  Reply
#5
Or you can do what I did and buy a SPAL set of motors and switches to put on the window winders. Works goodSmile

Greg
  Reply
#6
600$ ?!? That's stiff!

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#7
rpmcarter;65395 Wrote:for GAWD sake!!!!!!!!!!!!!!!!!!!!!!!!! I've been looking every where ... that's EXACTLY what I neeeeeeddddd and MORE!!!! Geezus. I look on ebay 2 times a week up till the past month. FIGURES!

Did you win the auction?

[Image: 386_07_10_13_5_58_42.jpeg]
My Mustangs:
71 M-code Mach 1, Medium Blue/White Sport, 4R70W, 3L50, Factory Ram Air.
72 Q-code Mach 1, Pewter/Black Sport, 4-spd, 3L25.
65 Convertible, Britney Blue/White/White, more modified than original.
05 Convertible, Legend Lime/Tan/Tan, future classic??
  Reply
#8
The convertible power window glass is worth $600 the pancake motors in the back $200 (cost me $150 to rebuild one in the nineties) the switches $300 (low est) door panels $150 each if fair, front motors and regulators $200, harness is $50. I paid $39 a switch in 1995 from Ford. their are 7 in the car now an NOS one would be $100 I bet. The switches are very fragile made of bake lite. I replaced all my single door ones with 1973 switches just make the wire ends a little bigger with an punch or something similar. I would say not a bad deal, I bet you could double your money separately with out even trying.

[Image: 2w6ugt2.png]
Brad Smith
  Reply
#9
Hi all, there is a shop in my area (MD) that installs power windows using universal kits, plus the buttons look look like the ones on new BMW'S. Is it worth it for $500 labor & parts? Has anyone installed after mkt pwr wndws before? Good quality parts too. I always wanted pwr wndws and thought its a good investment. Plus, I'm going to have all 4 buttons install on the center console above the ashtray (slope). Need opinions pleases, BTW my 72 conv is not stock, lots of mods done to it.
  Reply
#10
That sounds like a great set-up Sharp. Which kits do they use? I've thought of mounting the switches in the same place.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Consoles for sale 3514boltstang 0 74 08-19-2018, 09:18 AM
Last Post: 3514boltstang
  1971 mustang coupe for sale 71coupe 4 528 08-09-2018, 01:43 PM
Last Post: 71coupe
  For Sale: 1973 Deluxe Rear Bumper with Bumper Guards OLE PONY 5 723 08-01-2018, 05:21 PM
Last Post: OLE PONY
  1972 Q-code 4 speed power windows ,trac loc 3514boltstang 10 594 07-16-2018, 02:43 PM
Last Post: 3514boltstang
  ONE OF MY PROJECTS FOR SALE! kevken1959 3 378 07-09-2018, 04:17 PM
Last Post: chris.sima
  1971-1972 power window complete harness 3514boltstang 2 229 06-26-2018, 10:01 PM
Last Post: 3514boltstang
  71-72 power window switch Bezel and clips 3514boltstang 2 249 06-22-2018, 11:12 PM
Last Post: kcmash
  '71 Vert For Sale wrshog 2 279 06-12-2018, 10:44 AM
Last Post: mach71351c



Users browsing this thread: 1 Guest(s)