• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Comp cam
#1
Received me new Comp Cam from Flatlander Racing. As recommeded by their techline and also similar to our "DOC" I went with kit 32-242-4 spec's out @ 262 lift 513-520 duration. Set-up for good throttle response and strong mid-range.

After reading instructions, I may price out a shop to build it.. my wife wants her side of the garage back for the winter and I know I don't have enough time for that. Cold to her is temps below 50 deg.

Price was good at $388.00 including shipping , but yor can't get them on the phone after 2pm

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
(10-27-2010, 06:02 PM)not2old Wrote: Received me new Comp Cam from Flatlander Racing. As recommeded by their techline and also similar to our "DOC" I went with kit 32-242-4 spec's out @ 262 lift 513-520 duration. Set-up for good throttle response and strong mid-range.

After reading instructions, I may price out a shop to build it.. my wife wants her side of the garage back for the winter and I know I don't have enough time for that. Cold to her is temps below 50 deg.

Price was good at $388.00 including shipping , but yor can't get them on the phone after 2pm

That's great news, Alan. I'll be giving them a call in the next day or two, and it looks like I'm going with the 32-242-4 also. I'm going to do my best to just pull the heads and leave the rest inside, so that I don't infringe on my wife's side of the garage. Smile

I'm also thinking about building the heads myself. What kind of quote are you looking at for a machine shop build?

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#3
I am ok with rebuilding the heads, I have all the needed tools. Also can build the shortblock. My just need help dialing in the new cam set-up

I may build the long block and take it for cam timing.

Alan

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#4
(10-27-2010, 06:59 PM)not2old Wrote: I am ok with rebuilding the heads, I have all the needed tools. Also can build the shortblock. My just need help dialing in the new cam set-up

I may build the long block and take it for cam timing.

Alan

If you can do all the above I'm sure you should have no problem dialing the cam in. I've got parts strung between three garages and still need more space.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351c cam lobe ID. Have to measure lift Ryunker 8 290 07-23-2018, 06:04 PM
Last Post: Ryunker
  Most aggressive idle cam recommendation for stock CJ heads scgamecock 9 746 11-24-2017, 07:06 AM
Last Post: TommyK
  How aggressive is this cam???? scgamecock 4 784 10-20-2017, 02:30 PM
Last Post: Jeff73Mach1
  lost cam card. Find specs??? scgamecock 6 664 10-10-2017, 11:45 AM
Last Post: Hemikiller
  Summit 5200 camshaft gear to cam bolt size EvilPuppetMaster 4 722 09-19-2017, 04:56 PM
Last Post: SVO2SCJ
  Comp cams xe274h 83slimer 0 348 09-12-2017, 08:22 AM
Last Post: 83slimer
  New cam for my 408. turtle5353 26 2,550 06-09-2017, 12:12 PM
Last Post: turtle5353
  Comp Cams Hydraulic Roller Conversion question 73pony 31 2,468 06-08-2017, 06:07 AM
Last Post: turtle5353



Users browsing this thread: 1 Guest(s)