• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear disc brakes on the cheap!
#1
If you've ever wanted to put rear disc brakes on your 8" or small bearing 9" rear axle then you've probably seen how expensive some of the aftermarket kits can be. I did a write up over on Ford Muscle about how to use the very common Crown Victoria and the disc brakes off of its 8.8" axle on early Ford axles. Check it out!

http://www.fordmuscle.com/forums/braking...axles.html
  Reply
#2
OUTSTANDING article!!

I replaced the drums (on my Grandé) with a disc kit from Master Power Brake and considering the torque I am now making with the big block (472), I was looking at upgrading to larger drums on the back or going with one of gthe discs kits - - I believe in STOPPING even more so than Speed!Smile

Anyway, this is an additional option that I will consider once I get the car back from the paint shop!

THANKS for sharing!!

BT
  Reply
#3
Nice! I'm gonna have to look into this closer! Big Grin

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#4
Awesome! Looks like I won't even bother to mess with the factory drums when it's time. Thanks for the link!

Eric

[Image: mach1sig2.gif]
  Reply
#5
(07-18-2010, 12:16 AM)johndoe000 Wrote: If you've ever wanted to put rear disc brakes on your 8" or small bearing 9" rear axle then you've probably seen how expensive some of the aftermarket kits can be. I did a write up over on Ford Muscle about how to use the very common Crown Victoria and the disc brakes off of its 8.8" axle on early Ford axles. Check it out!

http://www.fordmuscle.com/forums/braking...axles.html

does this setup work on any 8 inch rear , such as a maverick or just the mustang 8 inch? thanks for any replys


in loving memory of my son ..Jason
  Reply
#6
(11-25-2010, 11:33 PM)mach1 fever Wrote:
(07-18-2010, 12:16 AM)johndoe000 Wrote: If you've ever wanted to put rear disc brakes on your 8" or small bearing 9" rear axle then you've probably seen how expensive some of the aftermarket kits can be. I did a write up over on Ford Muscle about how to use the very common Crown Victoria and the disc brakes off of its 8.8" axle on early Ford axles. Check it out!

http://www.fordmuscle.com/forums/braking...axles.html

does this setup work on any 8 inch rear , such as a maverick or just the mustang 8 inch? thanks for any replys

This setup will work on any 8" or small bearing 9" axle, mustang, maverick or otherwise
  Reply
#7
Not to sound like to much of a dummy, but I have seen post and ads for large and small bearings on a 9". What are the sizes of the bearingss so I can check mine to see what I have.Huh
Jim
  Reply
#8
(07-18-2010, 12:16 AM)johndoe000 Wrote: If you've ever wanted to put rear disc brakes on your 8" or small bearing 9" rear axle then you've probably seen how expensive some of the aftermarket kits can be. I did a write up over on Ford Muscle about how to use the very common Crown Victoria and the disc brakes off of its 8.8" axle on early Ford axles. Check it out!

http://www.fordmuscle.com/forums/braking...axles.html

Im all over it nice job.
  Reply
#9
That's a nice article. What are the differences between the CV and the Explorer? Which would be more advantageous.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#10
The explorer setup can only be installed on large bearing or Torino style 9" axles. The Vic setup is for all small bearing setups 8" or 9"

"BOSS 331"
73 fastback
331ci stroker
wide-ratio toploader
power discs front & rear
9" trak-lok axle w/ 3.70:1 gears
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  rear suspension 71_resurrection 2 205 07-16-2018, 01:56 PM
Last Post: Hemikiller
  Rear brakes sticking sometimes?? turtle5353 12 284 07-11-2018, 01:30 PM
Last Post: turtle5353
  Coil OVer rear shocks digithead 13 449 06-10-2018, 02:02 PM
Last Post: Hemikiller
  Rear Leaf Springs worn out? digithead 15 616 06-05-2018, 01:10 PM
Last Post: c9zx
  front disc brake conversion nailpounder 16 979 05-04-2018, 08:37 AM
Last Post: Stanglover
  rear wheel bearings... hmmm Casperfast 5 520 04-14-2018, 09:28 AM
Last Post: JSOK
  Power to Manual brakes? CalgaryChris 8 442 03-17-2018, 07:28 AM
Last Post: delawarebill
  Front disc brake swap master cylinder? Horsin' Around 10 748 12-18-2017, 09:58 PM
Last Post: imusa76



Users browsing this thread: 1 Guest(s)