• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
power steering pressure hose
#1
I jist realized that noone reproduces the Z shaped steel line that attaches to the back of the power steering pump. Anyone know what i should do about this? Its always something.

[Image: 21a884.jpg]
[Image: 11t8v1f.png]
  Reply
#2
mikepasquale1;41516 Wrote:I jist realized that noone reproduces the Z shaped steel line that attaches to the back of the power steering pump. Anyone know what i should do about this? Its always something.

I just replaced mine this year.. rockauto has them, I got one from a local store.
  Reply
#3
I looked at rockauto. it seems that its just the line that pushes into the rubber hose. thats not it.
Ill add pictures.

downwardspiral;41533 Wrote:
mikepasquale1;41516 Wrote:I jist realized that noone reproduces the Z shaped steel line that attaches to the back of the power steering pump. Anyone know what i should do about this? Its always something.

I just replaced mine this year.. rockauto has them, I got one from a local store.

  Reply
#4
You might be able to use a steel brake line and bend it up yourself. I don't know the pressure comparison between the power steering and brakes.

Jayson
[Image: 36319488731_8f2a376549_z.jpg]
73 Mach 1 Mustang
89 Dodge Shadow ES
94 Jeep Wrangler

  Reply
#5
If it comes down to that thats what ill have to do. I never bent or flared lines liek that before.
  Reply
#6
mikepasquale1;41540 Wrote:If it comes down to that thats what ill have to do. I never bent or flared lines liek that before.

If I remember correctly it's just your standard double flare, here's a pretty good walk through.
http://www.robrobinette.com/flare_brake_line.htm

A simple line bender link this will work just fine for what you need.
http://www.amazon.com/CTA-Brake-Line-Tub...B000GKEXS4
I made the hard fuel line that runs from the fuel pump to the carb with something similar.

Jayson
[Image: 36319488731_8f2a376549_z.jpg]
73 Mach 1 Mustang
89 Dodge Shadow ES
94 Jeep Wrangler

  Reply
#7
Keep in mind that power steering line is way bigger than brake lines
  Reply
#8
Ya its not something i want to make if i can help it
  Reply
#9
The only one I have at this time is on a running 72 Q code convertible.
Don't want to disable / start parting it out for a couple of weeks until stuff is moved for winter storage.
Don

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#10
Don, sent you a PM
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
Wrench Help! Not sure how to mount the power steering pump 351W Ballaratcastle 12 279 8 hours ago
Last Post: Hemikiller
  Correct 351C Power Steering Hoses? street rod mach 1 7 193 08-12-2018, 08:26 AM
Last Post: NOT A T5
  No Power After Putting Engine Back In VasiliBrown 5 243 07-31-2018, 02:52 PM
Last Post: delawarebill
Wrench low oil pressure or bad sensor or something else John J 3 230 07-13-2018, 07:29 AM
Last Post: Blue Mach 429 CJ
  Power Steering Pump Replace 1972 MACH, stock? andy72 9 431 05-17-2018, 12:05 PM
Last Post: Fabrice
  Can’t ID This Alternator & Steering Pump 4mm 7 824 02-25-2018, 05:19 PM
Last Post: 4mm
  Oil Pressure Gauge Reading JD Wright 8 926 11-16-2017, 10:48 AM
Last Post: Stanglover
  Aluminium-Hose between Canister & Air-Cleaner Duck 19 1,667 10-28-2017, 09:25 AM
Last Post: SteveO_71



Users browsing this thread: 1 Guest(s)