• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electric window motor removal
Does anyone have any experience removing the electric window motor on a 71 mach 1 ? I have the door panel off (passanger side) and took the 2 visible bolts holding the motor out. It doesn't move and I'm not sure how to release it from the gears so I can remove it. The window would not always go all the way up or down without a little help.
Don't take the motor out without having the window propped up with something.
I think there are three bolts to remove and disconnect the wire connector. Make sure you have the window propped and it should pull right out.

72 Q Code Mach 1, 351C, Toploader.
69 Torino GT Convertible, 351W, FMX
03 Anniversary Harley Davidson
31 Deluxe Tudor
91 F350 Lariet Crewcab 4x4, 460, automatic
2012 Escape 4x4
92 Feature Edition Mustang
82 F100 Shortbed
Thanks. I found there are actually four bolts. Two holding the motor and two holding the gear assembly, which is attached to the motor. I ordered a new gear and hopefully it won't be a problem putting everything back.
A new gear will not fix a lazy window...bad gear would make a popping noise. You are going to need a motor.
Well it's back as good as new. Not as bad putting it back as I thought it would be.
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  A/C box removal and strip down Pegleg 11 255 08-07-2018, 02:46 PM
Last Post: Carolina_Mountain_Mustangs
  Pedal Support Removal 73pony 6 179 08-02-2018, 10:13 PM
Last Post: 73pony
  wiper motor not working John J 5 229 07-24-2018, 08:51 PM
Last Post: John J
  AC box removal Pegleg 1 176 07-11-2018, 02:22 PM
Last Post: Butch65
  radiator removal SteveO_71 4 236 05-30-2018, 08:22 AM
Last Post: rackerm
  Wiper Switch Removal mudbilly 8 402 05-25-2018, 07:07 PM
Last Post: mudbilly
  Front Window Rear View Mirror Position andy72 3 299 04-12-2018, 08:41 AM
Last Post: SteveO_71
  Grease for Door Window Hardware and Sliders andy72 5 317 04-12-2018, 08:25 AM
Last Post: SteveO_71

Users browsing this thread: 1 Guest(s)