• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1973 egr plate needed
#1
I need the 1973 351C-2v EGR plate under my carb. Mine is rotten thru the side.
Any one have one they're willing to part with?
  Reply
#2
I might have one, I'll have to check for you tomorrow.

Jayson
[Image: 36319488731_8f2a376549_z.jpg]
73 Mach 1 Mustang
89 Dodge Shadow ES
94 Jeep Wrangler

  Reply
#3
Any luck Thej? I'm getting ready to drop the built motor in the body in a couple of weeks.
  Reply
#4
can you post a picture of the part you need? I have a 2bbl manifold and carb assembly, I will take apart and check if I know exactly what I am looking for.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#5
Jeff73Mach1;75895 Wrote:can you post a picture of the part you need? I have a 2bbl manifold and carb assembly, I will take apart and check if I know exactly what I am looking for.

I have one.
  Reply
#6
71steed;75896 Wrote:
Jeff73Mach1;75895 Wrote:can you post a picture of the part you need? I have a 2bbl manifold and carb assembly, I will take apart and check if I know exactly what I am looking for.

I have one.
Sorry for late reply, the board hasn't been notifying me of posts.
Here's one similar, my plate is aluminum.

.jpg   carb plate-alum.jpg (Size: 22.37 KB / Downloads: 37)
About 5/8" tall and the egr studs on the back are 2 7/8" apart. Mine is rotted thru on the bottom and I loaned it to a fellow that was supposed to try and duplicate it on a cnc and he ruined what I had left. At worst I could have filled it in with epoxy and made it work, not now....


.jpg   carb plate-top.JPG (Size: 43.46 KB / Downloads: 42)
.jpg   carb plate-bottom.JPG (Size: 46.18 KB / Downloads: 41)
  Reply
#7
I have a cast iron one from a windsor sitting in my shop. You can have it for shipping.

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [WTB] 1973 Front Bumper Mounting Hardware AOCUSNRET 8 273 08-03-2018, 12:31 PM
Last Post: rackerm
  [WTB] 1973 Mustang Rear Retractable Seat Belts AOCUSNRET 3 274 05-11-2018, 11:00 AM
Last Post: AOCUSNRET
  WTB: 1973 Medium Blue Full Console JCougarTopless 2 389 04-24-2018, 10:21 AM
Last Post: secluff
  [WTB] 1971-1973 Ram Air Base 4mm 11 778 04-13-2018, 05:53 PM
Last Post: 4mm
  [WTB] 1972/1973 convertible interior quarter panels JD79 2 393 02-05-2018, 01:20 PM
Last Post: sdstang
  Interior bits needed - 73 coupe shaheenk 6 483 12-27-2017, 02:43 PM
Last Post: shaheenk
  Want an NOS or really nice 1971-1973 Parking brake on dash light bezel, a kevken1959 0 279 12-19-2017, 09:44 PM
Last Post: kevken1959
  Quarter Window Interior Mouldings Needed Tegemus 1 327 11-18-2017, 01:07 AM
Last Post: Tegemus



Users browsing this thread: 1 Guest(s)