• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Special Periodic Award Fun Question
#1
As promised, here is the Periodic Award Fun Question. The first person to respond correctly will receive VIP membership (a 25$ value). If a current VIP member is the "winner", he/she will receive a 25$ postal money order. The correct response is readily available on this site; you only have to look it up!

The Award Fun Question for this period will require the development of the information found on a Warranty Plate utilizing the following:

The car in question is a Gold Glow 1973 Mach I with a knitted vinyl medium ginger interior. The car was assembled at the Dearborn factory and ordered through the Pittsburgh District Sales Office. It has a 302-2V engine with an FMX transmission and a 3:00:1 Open rear end. It was the twentieth car made at the plant for that year.

For your convenience, I have "lined up" the blocks that need to be filled with the correct response. The correct response will have All the blocks filled with the correct informaiton.

VIN:

Body Style Code:

Exterior Paint:

Interior Trim:

Axle Ratio:

Transmission Code:

District Sales Office Code:


Good Luck!


BT
  Reply
#2
How about this?

VIN: 3F05F100020

Body Style Code: 63R

Exterior Paint: 6F

Interior Trim: GF

Axle Ratio: 6

Transmission Code: X

District Sales Office Code: 38
  Reply
#3
Mike,

According to the source, you are very close but not quite "on the money" with your responses.

BT
The "source" for the correct responses to this question is located on this site at the "Data" forum as it pertains to the 1973 Mustangs. According to that source, the DSO for Pittsburgh is "14."

That having been said, I have reviewed another source which seems to indicate both 14 and 38 as being correct for the Pittsburgh's DSO.

With that in mind, I have made the decision to accept the previous response from MIKES73STANG as being correct in its entirety - - OUTSTANDING job, Mike!

I will be taking action to have Mike's member status updated to VIP as soon as possible.

BT
  Reply
#4
Congratulations Mikes73stang Big Grin
  Reply
#5
Nice job, Mike! Dodgy

Did you use the "Data" link at the top of the page, or another source for your VIN info?

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#6
Actually, I should have used the data link at the top, but I used several other sources. DSO codes seem to be somewhat contradictory depending where you look. I've seen some sites that list Pittsburg as 14 for 1964-1968, then 38 until 1971, and then not even showing Pittsburg, so who really knows? On top of that, it seems they may have changed codes during a model year, and used codes not officially listed until the next year. Very confusing.
  Reply
#7
gongrats Mike and welcome to the vip members join us in the lounge real soon for some caviar and brandyCool

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#8
(09-26-2010, 08:52 AM)72fastback Wrote: gongrats Mike and welcome to the vip members join us in the lounge real soon for some caviar and brandyCool

Caviar and brandy? I thought all you guys had was Keystone Light and Tostitos!

Where's my checkbook? I'm joining right now! Big Grin

Save me a spot on one of the velvet recliners, please.

Doc
(09-26-2010, 06:55 AM)Mikes73stang Wrote: Actually, I should have used the data link at the top, but I used several other sources. DSO codes seem to be somewhat contradictory depending where you look. I've seen some sites that list Pittsburg as 14 for 1964-1968, then 38 until 1971, and then not even showing Pittsburg, so who really knows? On top of that, it seems they may have changed codes during a model year, and used codes not officially listed until the next year. Very confusing.

I know what you mean. There are conflicting descriptions depending on where you get the code info. I think the info we have here is as close to "correct" as I've seen. Anyway, again, congrats!

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#9
Congrats Mike! Your status has been changed to VIP member! I'll PM you soon with your new email account details!

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#10
(09-26-2010, 11:52 AM)73vertproject Wrote:
(09-26-2010, 08:52 AM)72fastback Wrote: gongrats Mike and welcome to the vip members join us in the lounge real soon for some caviar and brandyCool

Caviar and brandy? I thought all you guys had was Keystone Light and Tostitos!

Where's my checkbook? I'm joining right now! Big Grin

Save me a spot on one of the velvet recliners, please.

Well, I WAS going to get out my checkbook, but when caviar and brandy were mentioned (and not the Keystone Light and Tostitos), I suddenly lost my motivation. Let me know when the kegerator and chip bowl are once again full and I'll make my way back. Big Grin

Eric

[Image: mach1sig2.gif]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Intake Cast Number Question kingb1973 4 241 3 hours ago
Last Post: kingb1973
  Axle question batwrangler 20 443 08-12-2018, 09:52 PM
Last Post: batwrangler
  SCJ Project car value and parts question atvdave 1 149 08-11-2018, 01:27 PM
Last Post: Don C
  '72 Sportsroof question soonerbillz 14 651 06-26-2018, 04:26 PM
Last Post: soonerbillz
  Rental Mustang question... soonerbillz 3 532 06-14-2018, 12:13 PM
Last Post: Boss1Ray
  Electrical Question mds1973 4 220 05-28-2018, 12:19 PM
Last Post: mds1973
Stang 1971 302 Spring Sport Special eanmartin68 2 451 03-02-2018, 12:51 PM
Last Post: Hemikiller
  Another Marti report question: Steel Guard Rails? Mustangfeverrr 2 650 05-30-2017, 05:17 PM
Last Post: Mustangfeverrr



Users browsing this thread: 1 Guest(s)